[pico]

What happens if you calculate full update? You do need a FA from lci car for this example donor vin would be best. Sometimes it happens that firmware is to old for current psdz you can search endless or just upgrade firmware of the kombi. First calculate it and post screenshots before flashing please.

SVT_soll is calculated
Changed Typschlussel to 2U11 (was 1H11) otherwise error FA2FP

I hope i followed correct procedure for this

Edit: In the meanwhile is the tamper dot disappeared, good sign i guess, keeping fingers crossed
Edit 2: Gone till 19u cet

[pico]

Managed to import the right caf but at the same time screwed things a bit up.
Witch caf to use was al the time in front of me (look pic above) and missed it for about 48h.
After the inject i had the bright idea to flash the car with enet, after the fifth or so module error out on ihka.
Car went nuts, e-sys refused to find zgw and half of the modules where unreachable trough ista-d, simply no com.
Than it hit me that 1) i didn't deselect update vcm after tal processing and 2) used the wrong fa so the few where updated with the wrong typschlussel and zeitkriterium. WTF!! Took me half a day to figure that out.
Installed original kombi and flashed the car with the right settings, worked well with my icom next clone that runs VCXDoIP, so far all good.
Let the car go to sleep, put kombi2 back and everything works, well sort of, from there on ista-d reads some wierd km, dde & kombi2 report the same fault: -1 km data not plausible, also kombi2 displays 150 km less than real km witch is the distance i drove in 2 days with old kombi (that shows real km), and f(censored)g tamper dot is back.
Enough for today, better luck tomorrow i guess...

Edit: 1 pic of the right way says more that 1000 words

[pico]

Does someone knows what could be the cure for that the KOMBI2 stays in the language selected in iDrive ? Because now when i shut down the car the language always revert back to english (also nbt), even vo coded with native language.

Oh and the self proclaimed best shop in europe forgot to erase one of the vin's stored in eeprom [facepalm] so tamper dot would stay no matter what. Good shop in Holland read the eeprom and direct found problem, so no more red dot.



Edit: Problem solved by flashing KOMBI2 with latest psdz

[pico]

Is it possible to force a bootloader flash, cause esys always returns negative response error when i try.
Why you may ask, well the bootloader that is now is for a F20 F56 (BTLD_00003C51) and want to change it to  F22 (BTLD_00003C4B) or should i let it as is ?

Edit: Made correction to actual bootloader

[pico]

Almost killed cluster yesterday with trying to flash with wrong bootloader (ofcourse when target F020 is wrong)
So after playing with ista i found function to read i-step from cluster and what appears now that it's i-level is F056-18-03-610 and is for MINI.
But how is this possible ?
As far that i know are clusters from mini different.
Really could use some input from the experts as to if it's even possible to flash F020 bootloader with e-sys or that other tools are needed.

[pico]

So just for the giggles i removed all files from kiswb except for F020, but to no avail always errors out.
Even removed expected sgbmid's

Code:

Read SVT before TAL execution started.

TAL execution started.
ExecutionID=2018/12/11-19:49:21.025
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
[] prepareVehicleForFlash finished [PROGRESS]
[KOMBI2 - 60] prepareECUforBLUpdate started [PROGRESS]
[KOMBI2 - 60] prepareECUforBLUpdate finished [PROGRESS]
[KOMBI2 - 60] authenticateECUforBLUpdate started [PROGRESS]
[KOMBI2 - 60] authenticateECUforBLUpdate finished [PROGRESS]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: TA started [TRANSACTION]
[KOMBI2 - 60] performECUBLUpdate started with protocol UDS [PROGRESS]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: 0% progress on ECUId:KOMBI2_0x60 [0% of btld_00003c4b-004_051_001] [TRANSACTION]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: 0% progress on ECUId:KOMBI2_0x60 [0% of btld_00003c4b-004_051_001] [TRANSACTION]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: 0% progress on ECUId:KOMBI2_0x60 [0% of btld_00003c4b-004_051_001] [TRANSACTION]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: 0% progress on ECUId:KOMBI2_0x60 [0% of btld_00003c4b-004_051_001] [TRANSACTION]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: 0% progress on ECUId:KOMBI2_0x60 [25% of btld_00003c4b-004_051_001] [TRANSACTION]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: 1% progress on ECUId:KOMBI2_0x60 [73% of btld_00003c4b-004_051_001] [TRANSACTION]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: 2% progress on ECUId:KOMBI2_0x60 [98% of btld_00003c4b-004_051_001] [TRANSACTION]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: 2% progress on ECUId:KOMBI2_0x60 [100% of btld_00003c4b-004_051_001] [TRANSACTION]
MCDDiagService<id=59200, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_CM_ICV - RoutineControl CheckMemory IndicatedCheckValue, description=error: positive response with negative content, link=KOMBI2_60_ETHERNET_63> [DIAGSERVICE]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: 2% progress on ECUId:KOMBI2_0x60 [100% of btld_00003c4b-004_051_001] [TRANSACTION]
[] job failed with negative response error:
code: repeat job
description: service RoutineControl CheckMemory IndicatedCheckValue returned incorrectResult; LinkName: KOMBI2_60_ETHERNET_63
 severity: ERROR
 [THROWABLE]
[KOMBI2 - 60 - btld_00003c4b-004_051_001] Transaction type: blFlash;  Message: TA finished [TRANSACTION]
[KOMBI2 - 60] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error:
 code: repeat job
 description: service RoutineControl CheckMemory IndicatedCheckValue returned incorrectResult; LinkName: KOMBI2_60_ETHERNET_63
 severity: ERROR
 [WARN]
[KOMBI2 - 60] - [Exception - KOMBI2 - 60] job failed with negative response error:
 code: repeat job
 description: service RoutineControl CheckMemory IndicatedCheckValue returned incorrectResult; LinkName: KOMBI2_60_ETHERNET_63
 severity: ERROR

Cluster stuck in flash mode (you know blink right - blink left - blink right -blink left ....), one SWFL missing and no CAF.
But no panic this time, been there yesterday.
Re-flash with right edited svt-tal for KOMBI2 (or should i say wrong one for my car) and everything is back up and running.
So seems that e-sys does a routine check and will not do the job.
How to bypass this ?

[Tuningservice.nl]

Hi guys.

Here the shop from Holland
I think I can flash the bootloader with abrites or BMW explorer?
I have this tools, anyone who can verify this ?

Greets Remy