[everyname]

Hello everybody,

before flashing the modded map I'm asking your opinion about how I switched off the EGR. Is it good?

Thanks!

[evobag]

WinOLS (Fiat idea EVERYNAME (EGR OFF OK) - 374450).rar
File Type:
Downloaded:	49 times
Size:	27.46 KB

this is ok (Poignée de main)

[everyname]

this is ok (Poignée de main)

Hello evobag,

thank you very much for your help!
I noticed that there are many differences in your file, is it all about EGR only or you modded something more? Please teach me!

Thanks!

[vagchip]

There are a couple of ways to close a egr.

One of them is via hysteresis maps!

[everyname]

There are a couple of ways to close a egr.

One of them is via hysteresis maps!

Good to know! I'll try both, thanks again vagchip!

[everyname]

I was not able to write any file (size 1Mb) via OBD with MPPS (v5, v12 and v16), it says that the file is "scambled". Am I doing something wrong? Reading around it seems that MPPS can not flash this car (and even the Musa with the same ECU), do you think Galletto 1260 can do it?

[vagchip]

Use bdm, or other tool.
I have mpps but i can't remember if i wrote that unit with that tool.

[everyname]

Use bdm, or other tool.
I have mpps but i can't remember if i wrote that unit with that tool.

I have read the ECU with Galletto 1260, compared this file with the MPPS one and I have found many differences in the first part of the file (the one that WinOLS does not recognize as 'map zone').

Now I'm wondering which file was properly read and which one should I flash after modify. I ask for your opinion.

PS: BDM is going to be my next step..!

[alex68]

Yes bmd or kess read ok

[jenny123]

It's possible to do "proper" (hysteresis) EGR OFF via MPPS?