Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. CarLabImmo

  2. AUTO-CHIPS

  3. Ecu-Service



24C64 - CarProg
27-09-2018, 06:56 AM,
Post: #1
ZVW  24C64 - CarProg
Hello , 

I am trying to read the eprom 24C64 from Golf mk6 instruments , but the results is 00000

I have CarProg with rework made , i have tried with the A6 clip directly on the board - no succes

Desoldered the chip , and tried like this. no succes.

Can you give me an adivse please ? 

Thank you
Quote this message in a reply
27-09-2018, 09:36 AM,
Post: #2
RE: 24C64 - CarProg
yes, your china carprog is shit as most of them. Also why are you trying to read eeprom only?
Quote this message in a reply
27-09-2018, 16:59 PM,
Post: #3
RE: 24C64 - CarProg
Hello suply 12 v to carprog and ot should read
Report back please
Regards
Quote this message in a reply
27-09-2018, 18:42 PM,
Post: #4
RE: 24C64 - CarProg
I had tryed even with +12V , not working sad. What i need to check to see if the rework is ok made ? I know that need to change something to read I2C chips like 24C64
Quote this message in a reply
27-09-2018, 19:57 PM,
Post: #5
RE: 24C64 - CarProg
change 4x 74hc125 to 74HC125D or M

KTAG 7.026 EU - KESS 5.017/2.47 EU - MPPS V18 EU - FGTECH EU
XCAN CLONE - CARPROG REWORKED - VCDS/OPCOM HQ - KESS/KTAG REWORKED
BDM ADAPTERS - BDM/BOOTFRAME HQ - BOOTPINS AND MANY MORE

>>"CONNECTION WIZARD" OBD BREAKOUT BOX WITH INTEGRATED COIL<<
ASK ME IN PM FOR INFOS AND SPECIAL PRICES
Quote this message in a reply
[+] 2 users say Thank You to 23Andi23 for this post
27-09-2018, 20:24 PM, (This post was last modified: 27-09-2018, 20:27 PM by eduardinidini.)
Post: #6
RE: 24C64 - CarProg
You have to change some integrated of your carprog. You need a soldering station. And change to 74HCT125M so you can read eprom 24xxx, or if you do not want to fix your carprog buy an eprom 24xxx reader are cheap. I attached some photos so you know what you should change. And if you see some component but change it. I had the same problem and fix it and already read eprom 24xxx


Attached Files
Carprog fix.rar
File Type: .rar
Downloaded: 69 times
Size: 426.34 KB

Quote this message in a reply
[+] 4 users say Thank You to eduardinidini for this post
28-09-2018, 22:07 PM,
Post: #7
RE: 24C64 - CarProg
I opened today the unit. I saw that i have the 74HT125D on the board. I have sent the unit to somebody who will update again even the firmware even the componentes. and solve even the problem with the Signal TO low of the transponder antena.
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Carprog need activation junnnior 55 6,236 09-06-2019, 22:18 PM
Last Post: maciek007
0Dash CarProg All Questions/Answers Here! mojsterb 876 274,631 02-06-2019, 14:59 PM
Last Post: al70
  Honda Civic 2015 24c64 mileage help danngrigore 1 264 20-05-2019, 14:03 PM
Last Post: Clusters
YTMercedes W211 mileage correction with carprog clone. Version 10.93 RUBBER_UNDIES 8 667 05-02-2019, 16:17 PM
Last Post: kryspl
YTMercedes w211 assyst carprog mitsakos5800 0 192 22-01-2019, 21:02 PM
Last Post: mitsakos5800
  CarProg V10.05 Lib 020117CAR0000021 mpautoservis 18 10,214 19-12-2018, 10:31 AM
Last Post: otojm
  actros dashbord eprom 24c64 piring to 50000km hel HASSAN555 1 594 15-09-2018, 01:06 AM
Last Post: Clusters
  MB Service Diag V0.2 in Carprog darkmal 0 501 13-08-2018, 19:37 PM
Last Post: darkmal
  Carprog d1 with a9 test fails any ideas for fix ? dil6222 7 3,368 18-06-2018, 19:22 PM
Last Post: dil6222
  Carprog A9 test problem. witux 4 1,007 10-03-2018, 18:58 PM
Last Post: rs@chip

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content