[darkchina811]

Hello everybody I upgraded to Gateway High 5Q0 907 530 AM for CanBus EXTENDED to retrofit TPMS Direct.
it is correct part number for my car from ETKA by dealer. stock GW was 5Q0 907 530 AL.

Gateway has been coded and admap like the old one. all good.
CP was removed. all good.
apparently parameters were restored, but I am not sure about this because:

- in Driving Profile Selection I have Normal, Sport and Individual, but I miss the ECO profile, which was there with stock GW. I don't have Comfort as well but not sure it that one was there before;
- when I select a profile different than Normal, the DPS button flashes but DOES NOT STAY yellow anymore like it used to;
- Start&Stop is apparently screwed up, if I click on it on the CAR radio menu, it says something like "function not available at the moment"; (MY S&S WOULD BE ACTUALLY OFF WITH VOLTAGE METHOD BUT I WANT IT FIXED);
- I am noticing a general instability of the radio, sometimes it just goes back to the first conf wizard and offers to do it again.

this was supposed to be the end of all my retrofits and I was so happy to finally put the car all back together.

this is the error stored in the GW:

Address 19: CAN Gateway (J533)       Labels 5Q0-907-530-V1.clb
   Part No SW: 5Q0 907 530 AM    HW: 5Q0 907 530 F
   Component: GW MQB High   128 1265  
   Revision: --------    Serial number: 0004271482
   Coding: 030100043F085700FB000248080F00010001050000000000000000000000
   Shop #: WSC 12345 123 28888
   ASAM Dataset: EV_GatewLear 013020
   ROD: EV_GatewLear_013_VW37.rod
   VCID: 7CA108E3766AC9672DC-8028

1 Fault Found:
1029 - invalid data record 
          B2005 00 [009] -  - 
          [ungültiger Datensatz: Funktion "erweiterte Anzeige StartStopp"]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 178
                    Mileage: 21331 km
                    Date: 2018.09.27
                    Time: 17:01:15

                    Supply voltage: Terminal 30: 11.8 V
                    Terminal 15: On

I happen to understand dataset was not reloaded correctly and need to do with ODIS online with connection to VW server, like a dealer.

can anybody explain the procedure please, or any other hint you could have to solve this?

GRAZIE

[ototest]

Hello everybody I upgraded to Gateway High 5Q0 907 530 AM for CanBus EXTENDED to retrofit TPMS Direct.
it is correct part number for my car from ETKA by dealer. stock GW was 5Q0 907 530 AL.

Gateway has been coded and admap like the old one. all good.
CP was removed. all good.
apparently parameters were restored, but I am not sure about this because:

- in Driving Profile Selection I have Normal, Sport and Individual, but I miss the ECO profile, which was there with stock GW. I don't have Comfort as well but not sure it that one was there before;
- when I select a profile different than Normal, the DPS button flashes but DOES NOT STAY yellow anymore like it used to;
- Start&Stop is apparently screwed up, if I click on it on the CAR radio menu, it says something like "function not available at the moment"; (MY S&S WOULD BE ACTUALLY OFF WITH VOLTAGE METHOD BUT I WANT IT FIXED);
- I am noticing a general instability of the radio, sometimes it just goes back to the first conf wizard and offers to do it again.

this was supposed to be the end of all my retrofits and I was so happy to finally put the car all back together.

this is the error stored in the GW:

Address 19: CAN Gateway (J533)       Labels 5Q0-907-530-V1.clb
   Part No SW: 5Q0 907 530 AM    HW: 5Q0 907 530 F
   Component: GW MQB High   128 1265  
   Revision: --------    Serial number: 0004271482
   Coding: 030100043F085700FB000248080F00010001050000000000000000000000
   Shop #: WSC 12345 123 28888
   ASAM Dataset: EV_GatewLear 013020
   ROD: EV_GatewLear_013_VW37.rod
   VCID: 7CA108E3766AC9672DC-8028

1 Fault Found:
1029 - invalid data record 
          B2005 00 [009] -  - 
          [ungültiger Datensatz: Funktion "erweiterte Anzeige StartStopp"]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 178
                    Mileage: 21331 km
                    Date: 2018.09.27
                    Time: 17:01:15

                    Supply voltage: Terminal 30: 11.8 V
                    Terminal 15: On

I happen to understand dataset was not reloaded correctly and need to do with ODIS online with connection to VW server, like a dealer.

can anybody explain the procedure please, or any other hint you could have to solve this?

GRAZIE

Find me PM, we can try all possible solutions.

[JIMMYQ]

did you resolve this issue?

[darkchina811]

yes it was fixed with ODIS online by loading FeC codes.