[gvitkis]

Hello to all

I did, FULL KAFAS retrofit for BMW f30, without ACC, with FSC KAFAS codes (7E, BF, BE) OEM for VIN.
I installed the new control panel, for control of the driver assistance system, at the bottom of the light switching control, replaced SZL with the option of driver assistance systems and added the vibration generator,electronics for steering wheel M

Everything works perfectly, (lane change warning and anti-collision warning), except for pedestrian protection.
I've done billions of tests but I can not make it work.
I hope you helped solve the problem.
Thanks so much.

[Jalami]

I have also tried many times. works well with night vision camera needs cam

[masa52]

all those bmw system are crap
working too late even if you set early
tested in f06,g30,g11
pedestrian comes up only once for me
done few retrofits with this system but seriously bmw is a way far behind if you compare to other brands
check your fsc cert. if BF is accepted all is fine!

[gvitkis]

all those bmw system are crap
working too late even if you set early
tested in f06,g30,g11
pedestrian comes up only once for me
done few retrofits with this system but seriously bmw is a way far behind if you compare to other brands
check your  fsc cert. if BF is accepted all is fine!

Yes, I checked with ESYS, FSC of KAFAS and they are all ACCEPTED
you're absolutely right, they are not reliable systems, almost useless, especially anti-collision warning.
I have done several functional tests, anti-collision warning, always performed under the same conditions, and with each test the system always behaves differently.
In fact for this reason I don't understand, KAFAS as calculates the danger.
What a strange system!!!!