[matteis]

Hi,

I've installed Mike's Easy BMW Tools Package. I am trying to see if the component protection is active in an X4 F26 and to do that I've been told to read error memory using INPA or Tool32.

It is the first time I am using these tools. So, sorry in advance for the dummy questions. After installing it, I opened ECU folder inside Ediabas folder to check prg files and I noticed there is no prg for nbt, nbt2 or nbtevo (all the files are dated from 2014). So it is reasonable to assume there is no way to use tool32 with the F26?

Is it possible to download prg files for nbtevo and put it into ECU folder?

Can anybody point me in the direction of how can I read fault memory with these tools or how can I determine if the component protection is active?

The X4 I am trying to work with has NBT_evo ID5.

[Almaretto]

Update from here https://cartechnology.co.uk/showthread.php?tid=7023

[smercki]

you can download last .prg file in link attachment

[matteis]

Update from here https://cartechnology.co.uk/showthread.php?tid=7023

Thanks, Almaretto. One question: if I understood it correctly, this is another tool that does some similar jobs to INPA and tool32, is that right?

[ruben_17non]

i think in cars with ZGW not possible component protection lock

[duckdonald]

the CP is only on cars with BDC.
but if you mount an NBT evo with SW containing CP, .. in a car without BDC. the component block also enters.