[gmarius]

I have bought a BMW E90 M3 Kombi with DCT lights(ZUSB number 7841922, HW number 9179415) and put 00->1F to 0000 and 2E8->2EE to FFFF. When I installed it in the car, it took my Km and after coding it with NCS the manipulation dot was still present. I have checked with Ediabas and my VIN was saved in the new Kombi but the manipulation is still there.
     I've made it virgin again and this time I wrote the VIN with Ediabas, still no change, the VIN is saved but the manipulation still present.
     There is another curios problem, after virginisation I am able to code the new kombi only once (doesn't matter if I use Expert or Manipulate profile). After this operation when I want to code it again I will receive the following error:
 
Codierung fehlerhaft (allgemein)  KOMB87, C_FG_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED

     The M3 kombi is mounted now in a 335d E90.
     Does anybody has any idea why it behave like this? Attached is the memory dump that I have read from kombi after virginisation.


     Thank you.

[rs@chip]

I have bought a BMW E90 M3 Kombi with DCT lights(ZUSB number 7841922, HW number 9179415) and put 00->1F to 0000 and 2E8->2EE to FFFF. When I installed it in the car, it took my Km and after coding it with NCS the manipulation dot was still present. I have checked with Ediabas and my VIN was saved in the new Kombi but the manipulation is still there.
     I've made it virgin again and this time I wrote the VIN with Ediabas, still no change, the VIN is saved but the manipulation still present.
     There is another curios problem, after virginisation I am able to code the new kombi only once (doesn't matter if I use Expert or Manipulate profile). After this operation when I want to code it again I will receive the following error:
 
Codierung fehlerhaft (allgemein)  KOMB87, C_FG_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED

     The M3 kombi is mounted now in a 335d E90.
     Does anybody has any idea why it behave like this? Attached is the memory dump that I have read from kombi after virginisation.


     Thank you.

Did you try KFP to chose zusb no. yourself with vin change and reflash the KOMBI?If you need send me the vin I will change it for you in dump

[gmarius]

I have Sp Daten 50.2 but I am unable to find an update for my ZUSB.
I already wrote the VIN with the programmer with no improvement, but maybe I did something wrong.

[rs@chip]

I have Sp Daten 50.2 but I am unable to find an update for my ZUSB.
I already wrote the VIN with the programmer with no improvement, but maybe I did something wrong.

Dounload the latest datens for your car only its not so big..than reflash it in comfort mode with forced programing enabled

[dumitru.o]

you did something wrong when writing into the file. i have the kombi on my 335d without any issue. now i put it on a 325d and still working good.

i went to a guy to write my VIN and km to 0 so i can t tell you where you did wrong. anyway, i know he replaced the VIN in one location and the km in another.