Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
cas / cluster bench setup
15-10-2018, 17:43 PM,
Post: #11
|
|||
|
|||
RE: cas / cluster bench setup
here is power supply im using
thank you everyone for the help. tonight ill draw out how i have everything connected, maybe someone can see if i have something wrong. |
|||
16-10-2018, 03:40 AM,
Post: #12
|
|||
|
|||
RE: cas / cluster bench setup
heres what i have
Obd2 1: Wake 4: Ground 5: Ground 6: to cas 34 CAN H 14: to cas 17 CAN L JBBE Blue plug 46: to cas 35 CAN H 26: to cas 26 CAN L 47 pin plug 23: Ground 23 pin plug 21: +12v Black plug 29: to kombi 6 pin CAN H 31: to kombi 7 pin CAN L CAS 21: +12v 34: +12v 25: Ground 11: Ground 34: to 6 obd CAN H 17: to 14 obd CAN L 19: wake ribbon to key holder and start button KOMBI 9: +12v 18: Ground 6: to jbbe 29 CAN H 7: to jbbe 31 CAN L |
|||
16-10-2018, 09:02 AM,
Post: #13
|
|||
|
|||
RE: cas / cluster bench setup
(14-10-2018, 10:08 AM)wxwwxw Wrote: You need minimum: is it possible to code with this setup? best regards. |
|||
16-10-2018, 18:29 PM,
Post: #14
|
|||
|
|||
RE: cas / cluster bench setup
(16-10-2018, 09:02 AM)dommeij Wrote:(14-10-2018, 10:08 AM)wxwwxw Wrote: You need minimum: Yes, that's enough Here is my more extensive version https://youtu.be/FdAD2EnC3gk |
|||
16-10-2018, 19:30 PM,
Post: #15
|
|||
|
|||
RE: cas / cluster bench setup
10A should be enough for the bench except CIC (it can consume more than 10A) or NBT.
Also it's better to have CAS3 non-ELV version (or flash to it) instead of CAS2. |
|||
17-10-2018, 02:48 AM,
Post: #16
|
|||
|
|||
RE: cas / cluster bench setup
can anyone verify if the pinout i posted above are correct? tried my best to do it from the diagrams posted, but im not the best at reading diagrams and still learning.
|
|||
17-10-2018, 15:01 PM,
Post: #17
|
|||
|
|||
RE: cas / cluster bench setup
(16-10-2018, 03:40 AM)Cniksor Wrote: heres what i have Check the JBBE power supply |
|||
18-10-2018, 17:01 PM,
(This post was last modified: 18-10-2018, 17:04 PM by wxwwxw.)
Post: #18
|
|||
|
|||
RE: cas / cluster bench setup
(17-10-2018, 02:48 AM)Cniksor Wrote: can anyone verify if the pinout i posted above are correct? tried my best to do it from the diagrams posted, but im not the best at reading diagrams and still learning. It will start by connecting the JBBE itself. If you connect as below, up to 65s after turning on the power you will be able to connect through obd2. blue connector JBBE 33 - 14 obd2 17 - 6 obd2 47 pin connector 23 - GND 23 pin connector 3 + 12v 5 + 12v 6 + 12v 7 + 12v 21 + 12v 22 + 12v 23 + 12v obd2 16 + 12v 4 and 5 - GND Once you get a connection with JBBE, then build CAS and ELV and KOMBI |
|||
22-10-2018, 03:56 AM,
Post: #19
|
|||
|
|||
RE: cas / cluster bench setup
ok i have the JBBE connected as posted above. whats best method to use to test if im getting connection via OBD2. using inpa?
again thanks for everyones post helping, still learning and hoping this post will help others too |
|||
22-10-2018, 14:20 PM,
Post: #20
|
|||
|
|||
RE: cas / cluster bench setup
(22-10-2018, 03:56 AM)Cniksor Wrote: ok i have the JBBE connected as posted above. whats best method to use to test if im getting connection via OBD2. using inpa? Connect like in the picture It cost me a lot of time |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Tool for bench read 8hp | Garryq | 9 | 1,572 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
F80 Cluster - setup | iskullbox | 2 | 268 |
25-03-2024, 14:38 PM Last Post: Unspec |
|
Bosch MEVD172H bench backup | mrproper | 1 | 249 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
BMW E87 swap M5 V10 coding cluster | Pedrom92 | 0 | 99 |
20-03-2024, 22:50 PM Last Post: Pedrom92 |
|
BMW G02 NBT need FSC instrument cluster swap | Mr.Tester | 1 | 126 |
07-03-2024, 21:10 PM Last Post: painsage |
|
BMW g30 MID cluster in g20 help | Pedrom92 | 1 | 146 |
07-03-2024, 00:08 AM Last Post: Pedrom92 |
|
ESys Launcher PRO Setup 2.8.1 | fengyonghua21 | 400 | 47,134 |
28-02-2024, 09:39 AM Last Post: Pommie |
|
ENAV2 bench activation | Airbus | 10 | 801 |
25-02-2024, 08:17 AM Last Post: jb2005 |
|
ISTA...setup | macchief | 17 | 1,176 |
17-02-2024, 20:33 PM Last Post: macchief |
|
Motronic 3.3.1 bench | jaramillo | 3 | 174 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content