Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. FemtoEVO



cas / cluster bench setup
22-01-2019, 23:11 PM,
Post: #81
RE: cas / cluster bench setup
(21-01-2019, 20:40 PM)Cowboy Wrote:  I added FRM to my bench with modules, and tested the set with another CAS 2. Everything works. smile

Can you post which pins you used for FRM?
Quote this message in a reply
Yesterday, 07:44 AM, (This post was last modified: Yesterday, 07:47 AM by willisodhiambo.)
Post: #82
RE: cas / cluster bench setup
1. Upper connector X14261 pins 2,34,1 and 3. They are all huge 4mm wires, Red or reddish brown with yellow or other mark

2. Same connector the brown grounds pin 18 and 33. Also connected the ground from other connector pin 47 but I think it is not necessary

3. K-can on lower connector X14260 pins 45low and 45high to Kcan lines at JBBF, pins 10 and 45 on blue connector at JBBF

By the way I think it does not matter what plug at JBBF you use for CAN bus lines because they are all interconnected internally?
Quote this message in a reply
Yesterday, 18:43 PM,
Post: #83
RE: cas / cluster bench setup
(22-01-2019, 23:11 PM)Impac Wrote:  
(21-01-2019, 20:40 PM)Cowboy Wrote:  I added FRM to my bench with modules, and tested the set with another CAS 2. Everything works. smile

Can you post which pins you used for FRM?
hi
FRM module :
connector X14260-51-pin, black:
Pin 2=KL30
Pin 47=Ground
Pin 45=K-bus signal/Connect to :JBBF Pin 10 CAN-bus connector (connector X14271-54-pin, blue)
Pin 46=K-bus signal/Connect to :JBBF Pin 46 CAN-bus connector (connector X14271-54-pin, blue)
connector X14261-51-pin, black
Pin 1=KL30
Pin 3=KL30
Pin 34=KL30
Pin 18=Ground
Pin 33=Ground
Pin 12=Supply, terminal 15/ Connect to: CAS Pin 14 (connector X13376-41-pin, black)
Greetings!
Quote this message in a reply
[+] 1 user says Thank You to Cowboy for this post


Possibly Related Threads...
Thread Author Replies Views Last Post
XZBMW Anyone can help me for mount E-series bench? ruben_17non 26 7,087 19-01-2019, 13:15 PM
Last Post: ccfj1
  strange problem with bench Silva1337 5 168 17-01-2019, 06:05 AM
Last Post: willisodhiambo
  ccc bench wake up zero9 5 361 15-01-2019, 16:21 PM
Last Post: ashrafpts
  Solved ✔ NBT EVO HW4.1 on the bench Coding34 15 1,203 12-01-2019, 16:34 PM
Last Post: Coding34
XZBMW BMW E89 CAS 3 bench flashing - Need help KSpeed 11 397 11-01-2019, 19:48 PM
Last Post: KSpeed
  Bench programming NBT Evo. Vehicle Parked signal? vilord 3 172 11-01-2019, 15:46 PM
Last Post: vilord
XZBMW Flashing ZGW 1 to ZGW 2 & CIC & NBT bench test, Please help nguyennhatquang 35 16,093 10-01-2019, 19:27 PM
Last Post: vipsha
  Bench programming station E Series Stivikivi 13 4,018 02-01-2019, 01:09 AM
Last Post: jameeduardo
  NBT Testing on Bench Sound Problem amigo74 3 157 31-12-2018, 13:46 PM
Last Post: amigo74
XZBMW Bench coding CAS and Kombi ccfj1 17 1,559 31-12-2018, 00:01 AM
Last Post: Silva1337

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content