Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ BMW Mileage correction goes bad after few days
13-10-2018, 17:32 PM,
(This post was last modified: 16-10-2018, 23:16 PM by volavka.)
Post: #1
|
|||
|
|||
BMW Mileage correction goes bad after few days
Done mileage correction for 3 different BMW models and all have a problem after a few days. Speed doesn't work and comes more and more problems Like dsc icm dde and others units going crazy load of faulds. What is strange all is ok in the beginning only after few days goes strange things event f and e class.
Any ideas? |
|||
13-10-2018, 18:10 PM,
Post: #2
|
|||
|
|||
RE: BMW Mileage correction goes bad after few days
(13-10-2018, 17:32 PM)braticks Wrote: Done mileage correction for 3 different BMW models and all have a problem after a few days. Speed doesn't work and comes more and more problems Like dsc icm dde and others units going crazy load of faulds. What is strange all is ok in the beginning only after few days goes strange things event f and e class. Give us a few other info like, what BMW models, what method did you use and what tools did you use. Bmw's are not easy cars for this kind of work |
|||
13-10-2018, 18:45 PM,
Post: #3
|
|||
|
|||
RE: BMW Mileage correction goes bad after few days
try desoldering chip , clean bord and solder again
|
|||
13-10-2018, 18:48 PM,
Post: #4
|
|||
|
|||
RE: BMW Mileage correction goes bad after few days
Its a f07 e91 and e63.
Tool r270+. Done 0 miles cas3 for e series. And dash eeprom 080d to needed miles (eeprom desoldered fixed and soldered back after try use new eeprom flashed and soldered). For F series cas4 soldered can blocker and dash epprom done as above. Even flashed back old flash and eeprom to cas3 and eeprom to dash have the same problems... |
|||
13-10-2018, 18:49 PM,
Post: #5
|
|||
|
|||
RE: BMW Mileage correction goes bad after few days
Probably can filters gooes crazy becouse of bad quality..If not the case and did not use emulators have to do something with soldering in cas or kombi
|
|||
13-10-2018, 18:58 PM,
Post: #6
|
|||
|
|||
RE: BMW Mileage correction goes bad after few days
Also before all came crazy, dashes stop working. For all cars cluster stops working only speed gauge works nothing else.
Now I have changed dashes for e91 and f07 untouched still same problem. Must be cas problems apparently. |
|||
13-10-2018, 21:50 PM,
Post: #7
|
|||
|
|||
RE: BMW Mileage correction goes bad after few days
(13-10-2018, 18:58 PM)braticks Wrote: Also before all came crazy, dashes stop working. For all cars cluster stops working only speed gauge works nothing else. did you use can emulators or did not?If not than how did you read and reset mileage in cas unit?soldering checked?..maybe something on pcb left |
|||
14-10-2018, 13:48 PM,
Post: #8
|
|||
|
|||
RE: BMW Mileage correction goes bad after few days
(13-10-2018, 21:50 PM)rs@chip Wrote:(13-10-2018, 18:58 PM)braticks Wrote: Also before all came crazy, dashes stop working. For all cars cluster stops working only speed gauge works nothing else. I readed cas3 with r270 an use Nyo4 to reset it. So far have other issiue when changed clusters I can't reset services and on f07 rear hydraulic doesn't work. Waiting for new cas units will try with them. Attaching original files and moded. Can have a look and check or all good? |