[Shadowfox]

Hi everyone

I'm new here and new to ecu tuning, I need help with a diy remap I'm trying to do on my van

What I've done so far based on research and some advice is using mpps v13 read the flash and saved it as a .bin file. Not really sure what to do now or if my file is read properly checksum and then tunning the file 

Ecu make is delco d 

Any help would be great

Many thanks in advance

[Vlado ATM Chiptuning]

if you read ecu file, u need to send it to someone to modified for you, or post here maybe someone will made it

[Shadowfox]

if you read ecu file, u need to send it to someone to modified for you, or post here maybe someone will made it

Thanks for the information but its something I'm interested in doing myself or with alittle tunning help, the reading and flashing I can but not sure how long it would take to learn to code/modify an ecu file... besides I only want to flash it once to minimise the risk of bricking it up

The van is all stock other than the EGR valve being blanked off... 

Ps
This is a project and just abit of fun 

[onur]

hw : ?
  sw : ?

[Shadowfox]

hw : ?
  sw : ?

Hi, hopefully I found the right information that you asked for and apologies for it being picture format. 

Thank you

[onur]

test and report

[Shadowfox]

test and report

Just the job thank you so much, my van really pulls now through all the gears and the flat spot has gone at 2000-2200rpm...Tools used: laptop, power booster on the van battery and mpps v13 flashed the Delco d ECU with a stage1 tune. 

Big thanks again to the member who tuned my map