Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Isuzu D-Max 2.5 Spedo
18-10-2018, 22:38 PM,
Post: #1
|
|||
|
|||
Isuzu D-Max 2.5 Spedo
Hi,
Please, any hint for this nightmare... I open this Spedo to correct mileage, and all seems to work fine till the point where I put Ignition on... Temp. gauge rise up to 70Cº Fuel gauge rise up to full with reserve light on... Conclusion: from both gauges, clock spring lose his adjustment... Anyone knows something about it, how to prevent it... |
|||
19-10-2018, 07:27 AM,
Post: #2
|
|||
|
|||
RE: Isuzu D-Max 2.5 Spedo
Please anyone, any Idee...
Thanks! |
|||
19-10-2018, 22:16 PM,
Post: #3
|
|||
|
|||
RE: Isuzu D-Max 2.5 Spedo
If the mileage changes, restore the original file and try.
|
|||
19-10-2018, 23:46 PM,
Post: #4
|
|||
|
|||
RE: Isuzu D-Max 2.5 Spedo
|
|||
21-10-2018, 20:18 PM,
Post: #5
|
|||
|
|||
RE: Isuzu D-Max 2.5 Spedo
Have you tried the original dump ? Have you got the needle motor spring connections in correctly? or have you damaged the needle motor?
|
|||
23-10-2018, 17:43 PM,
Post: #6
|
|||
|
|||
RE: Isuzu D-Max 2.5 Spedo
(19-10-2018, 07:27 AM)dijo Wrote: Please anyone, any Idee...hi, last time i have broken one dash like your's ,it have a very sensible needels when you take them out & specially when you turn it a little it be damaged, they loose their correct tension & their calibration (i speak about the spring-tension). so for those DMAX Dash it's so hard without a pinout connections... regards |
|||
23-10-2018, 19:16 PM,
Post: #7
|
|||
|
|||
RE: Isuzu D-Max 2.5 Spedo
Thanks for your´s replay...
I´m waiting for the second dash... Then I will see what I can make... But the problem was that I have turned the needles from one point to another, for the adjustment... Are there any pinout connection to avoid this damage...? |
|||
24-10-2018, 18:56 PM,
Post: #8
|
|||
|
|||
RE: Isuzu D-Max 2.5 Spedo
(23-10-2018, 19:16 PM)dijo Wrote: Thanks for your´s replay... Its quiet easy to find pinout now which you have one dash open. See the direction of the chip and solder cables from the back side of PCB. |
|||
24-10-2018, 19:29 PM,
Post: #9
|
|||
|
|||
RE: Isuzu D-Max 2.5 Spedo
(24-10-2018, 18:56 PM)Dash_Burner Wrote:(23-10-2018, 19:16 PM)dijo Wrote: Thanks for your´s replay... Now it is easy, this dash is for playing... Need to find GND pin on the backside of eeprom and solder cables... Need to pray that not another component will blow... |
|||
25-10-2018, 16:01 PM,
Post: #10
|
|||
|
|||
RE: Isuzu D-Max 2.5 Spedo
(24-10-2018, 19:29 PM)dijo Wrote:hi, please can you share the connections you find !!!(24-10-2018, 18:56 PM)Dash_Burner Wrote:(23-10-2018, 19:16 PM)dijo Wrote: Thanks for your´s replay... |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ISUZU 750 TRUCK CHANGE OF KM | Black Alien | 3 | 179 |
27-02-2024, 19:51 PM Last Post: Black Alien |
|
Solved ✔ ISUZU 750 TRUCK CHANGE OF KM | Black Alien | 1 | 162 |
09-01-2024, 09:42 AM Last Post: Black Alien |
|
Isuzu Dmax 2008 km change | ottway | 1 | 197 |
31-10-2023, 11:15 AM Last Post: Clusters |
|
No Feedback Given adjust mileage isuzu truck FVM | narongchai ponngam | 3 | 355 |
15-10-2023, 15:48 PM Last Post: Clusters |
|
CORRECTIO DASH ISUZU DMAX | diags | 4 | 1,200 |
27-02-2023, 19:18 PM Last Post: Cunder79 |
|
ISUZU NKR mileage | QUIKCAR | 0 | 385 |
10-11-2022, 13:03 PM Last Post: QUIKCAR |
|
ISUZU MILEAGE CORRECTION 93C56 | shanektm450 | 1 | 453 |
04-06-2022, 17:10 PM Last Post: mikroel |
|
Solved ✔ ISUZU 2015 93C66 CORRECTION | shanektm450 | 2 | 737 |
24-05-2022, 12:19 PM Last Post: shanektm450 |
|
Solved ✔ Isuzu Dmax 2017 Km change | Black Alien | 3 | 626 |
31-10-2019, 08:13 AM Last Post: Black Alien |
|
Solved ✔ 2005 isuzu ELF Mileage correction | Black Alien | 2 | 678 |
12-09-2019, 12:41 PM Last Post: Black Alien |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content