Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bimmercode no longer work after Carplay BIN patch
19-10-2018, 09:40 AM,
Post: #1
|
|||
|
|||
Bimmercode no longer work after Carplay BIN patch
Hi guys anyone noticed after applying BIN patch to enable Carplay/VIM that Bimmercode can no longer connect to HU_NBT2?
BIN patch went fine. All works good. Bimmercode can still connect to other ECU except Evo HU. Bimmercode developer says BIN patch change coding signature that's why and that there is no solution. Anyone? |
|||
19-10-2018, 19:43 PM,
Post: #2
|
|||
|
|||
RE: Bimmercode no longer work after Carplay BIN patch
Did you see you're cafd with e-sys?
|
|||
07-11-2018, 20:18 PM,
Post: #3
|
|||
|
|||
RE: Bimmercode no longer work after Carplay BIN patch
Have had the same issue, Bimmercode will read the HU -NBT2 but then says 'no coding data'. I can read and edit with e-sys with the patch active. Can reset to original configuration and Bimmercode will then work as normal. Apply the BIN file again and Bimmercode stops working on the HU-NBT2. All others read and work fine.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content