[bank]

the original auto plug for display uses 6 pins
1 - mass
5 - power +12V
19 - CAN - L Radio
20 - CAN - H Radio
22 - MS - CAN - H - Diagnosestecker
23 - MS - CAN - L - Diagnosestecker
25 - LS - CAN -H Airbag
28 - LS - CAN -H BCM

at the moment I have only connected pins 19 and 20
between the radio and the display + power pins 1 and 5

---

Connect diagnostic tool (e.g. op-com or Tech2) to display pins and make procedure of pairing (Anitheft protection activation). After that you'll a receiva a working pair



DIS - OBD
22  -  3
23  -  11
1   -   4, 5
5   -   16

[jox]

in two days I will get the interface (op-com)

I will check and write if it works

[jox]

I connected OP-COM and display as wrote "bank".
I chose the function "Deactivation Theft Protection".
Next, I entered the code from the display dump.

OK

few seconds

DONE

radio and display working without "SAFE" messages

Thank you all for help

[dil6222]

Wicked glad it works and managed to come to solution between us

it keeps our cartech world turning