[Rawediag]

Hi, guys i am afraid i need your help. I am trying to activate navigation in retrofitted CIC without success. I patched CIC with script, changed vin with FStool, and then i successfully stored and checked signature, certificate, but when i checked FSC got error 11049. I got and used fsc repair pack and also used files from FSC templates from SWT patcher and tried to sign them, but always 11049. I tried it with Dr.Gini too. Guy who sent me repair pack said: use ESYS, but car don't have ethernet wired to obd and my ESYS when opening any editor is now saying: No more memory available C150...Thanks for any assistance.

[Twoone]

Hi, guys i am afraid i need your help. I am trying to activate navigation in retrofitted CIC without success. I patched CIC with script, changed vin with FStool, and then i successfully stored and checked signature, certificate, but when i checked FSC got error 11049. I got and used fsc repair pack and also used files from FSC templates from SWT patcher and tried to sign them, but always 11049. I tried it with Dr.Gini too. Guy who sent me repair pack said: use ESYS, but car don't have ethernet wired to obd and my ESYS when opening any editor is now saying: No more memory available C150...Thanks for any assistance.

A repair set FSC for retrofitted CIC witch is patched?

If you used the patch for self sigened certificates from intel123 then you have to use the FSC templates and cert's. In the templates you have to set your own VIN.

[Rawediag]

Ok thanks. I probably did not fully understand when the repair kit is needed. I'd say I tried fsc from the templates, changed the vin and signed it. But maybe now i see a problem in my FSTOOL config. In the second image I used the certificate and sig from patch but fsc from the kit.

[bimmer71]

as per intel123 instruction ? did you update cic before Appling   any of the patches ?

just a thought ,  may want to redo  , I just quercous why could you not just generate code from 1b file or vin with repair kit and  fsc generator found here on ct forum ?

[E82.Carbon]

DHow did you get FSTool to connect? I’ve got ncs, inpa , dr Gini and they all work connect with the car but can’t get FSTool to connect

[duckdonald]

Hi, guys i am afraid i need your help. I am trying to activate navigation in retrofitted CIC without success. I patched CIC with script, changed vin with FStool, and then i successfully stored and checked signature, certificate, but when i checked FSC got error 11049. I got and used fsc repair pack and also used files from FSC templates from SWT patcher and tried to sign them, but always 11049. I tried it with Dr.Gini too. Guy who sent me repair pack said: use ESYS, but car don't have ethernet wired to obd and my ESYS when opening any editor is now saying: No more memory available C150...Thanks for any assistance.

hi, .. but what model is your cic? (Ex or FX)
I think from how you explained both FX, .. I am attaching an FSC Patch set for your cic (if the vin in the picture was correct)
Try this and let us know if you've solved it.

[Rawediag]

For Bimmer71: I did NOT update CIC because it is from 12/2011(C1A) and i thought it is NOT necessary.

For E82.Carbon: When i tried it first time, i couldn't connect to server(using ICOM). Then i downloaded some better version from this forum. Installed car server, replaced two bat files(i think Dr.Gini said it).Then lock icom with easyconnect, run csd-start.bat and run start_fstool_v2_carserver.bat and it worked.

For Duckdonald: CIC is from e92, see image. Thanks for FSC repair pack, there are more files and instructions(but for Fx series), than in first i recived.

What do you think about gateway number in image? I don't have car in garage now, so i will let you know when i can.

[duckdonald]

use tool32 or inpa, to read GW number,

[Yah]

Hello,
I have the same problem as Rawediag, I have everything accepted successfully, STORE_SIG_CERT, STORE_FSC_CERT, STORE_FSC, CHECK_SIG_CERT, CHECK_FSC_CERT but it only fails on CHECK_FSC.
I have flashed CIC with the latest version and connected with ICOM, virginized with intel123's procedure.
In FSCTool are only Certificates accepted but FSC rejected.
Did someone solved it?
Thank you!

[NeRkO20]

Have same issue...chwck fsc fails...

But I have also SW signatur status: rejeceted when I do GET_STATUS

This is not my first cic which I activate this way. Flashed 3x time 63,62,A0 ...
Is there a easy way to vriginze completly? Because after 2nd flash I checked GET STATUS ang got same as before flashing...but I didn't upload FSCs...that means that they are still there after reflash
Any Ideas?