[mysterious]

Hi, can someone help to turn off limp mode on edc16u31?
Audi 2005, BRB 1.9 85 kw

HW: 0281012723
SW: 1037377587

[ltujustas]

what dtc you have ?

[Vlado ATM Chiptuning]

maybe he want complete table

[cniky]

...and 1 or 2 new turbos at least for replacement after that.

Getting back on the track, in to a world, where stripping out the engine sw, it is the everybody favorite game , for any reason, you should let alone the limp mode limit and fix the car.

[mysterious]

Have p0403 and p1641, did EGR off like This, but still limp mode

[ltujustas]

p1641 p0403 off
EGR off

[mysterious]

p1641 p0403 off
EGR off

Did you see my file? I'm did in the same way, in vag edc 16 it's simple to remove any dtc, egr or dpf... Was very interesting why car sometimes was in limp mode although air mass on low rpm always were 450 mg/str. Reason was stucked valve. So hysteresis were not enough to avoid limp mode, but after unplug valve's plug everything fine.



But anyway thanks Justai for respond

[zenter performance]

i know how remove limp mode : D dtc will not help  but for egr dont need remove eny limp mode :

[mysterious]

Zenter, for me also it was first time when vag group car with edc16 was in limp mode due to Egr .
Injection quantity max 22mg/str, then i'm erase fault codes, car go well, quantity max ~ 50 mg/str. until second limp mode. So hysteresis down, unplug valve's plug and then everything fine.