[Tombo]

Torrent would be good idea

[NeRkO20]

MEGA broke up...at 16,51gb of 16,57gb...have to star downloading again...hate it

[Exotic Hadron]

Thanks for sharing, tho this MEGA sharing is a mess. I never was able to finish the download.
It sets the download limit to 600 megs a day...
Could anyone please reupload this to any other provider or, better, create a torrent?

[NeRkO20]

r u using the MEGA app? With the MEGA app you can download a part, then you have to wait some hours but the app continues automatically. I can´t creat a torrent...dont know which tracke to use...otherwise I would

[Exotic Hadron]

Could you please upload to Yandex disk? It allows for bulk downloads/uploads.
Mega says the download will finish in 29 days... As for the trackers, I believe, you could use any publicly available tracker found on the internet, as you only need to specify the tracker address in the TORRENT file.

Found on the internet:
Maps (says it's a 1 USB version): (see attached)
FSC Generator: (see attached)

(Note: remove the underscore before the address)

I recommend using JDownloader to download the archives.

To generate the FSC code:
1. Place the SH file found in the archive on a FAT32 formatted flash drive.
1.1 Use HP USB Disk Storage Format Tool 2.2.3 or Guiformat tools to format the USB stick if Car Infotainment Computer (CIC) doesn't see the flash drive.
2. Insert the keyfob and turn ignition on.
3. Plug the USB stick into the socket found inside the glovebox.
4. Wait for some time (I don't know how long but I believe a couple minutes would be more than enough) and turn ignition off.
5. Plug the USB drive into your computer and run the FSC Generator; Use the 1B HEX file found on the flash drive. Specify FF for both country and map types bytes.
5.1 If you are using a retrofitted CIC from another car, the CIS would have its own VIN; you can obtain it by using E-SYS: select Comfort Mode > FSC > Check FSC status.

Alternatively, you can use AI Coder to obtain the FSC code. Substitute 4 with 6 in the link found in the AI Coder thread to get the latest version.