[Mz0n]

Interesting...

I havn't seen any file extensions like .bin or .ori. Does Kess use these ones? The readout was without anything, just file.

You would like to say the tune has to be named xxxx.MOD and the original should named xxxx.bin in the same folder?

Not clear yet, please clarify.

Follow its

If you use ECM Titanium you need system 32bits to it work fine without problem..


with kess v2 Read and save file..

Run ECM titanium on sys 32bits make your modification and save file 

you can change extension name to MOTOBmw.bin 

and try write with kess..

Kess can write xxxx.bin , xxxx.ols, xxxx.mod



Kess you have is 5.017 ( red or green pcb )?


If you wanna send me file ori ( file you save reading with kess ) and send me file you make modification to i check.
maybe if no change anything bad modification let me see both files..
send me if you wanna see solved problem

[K43-Frank]

Hi,
I've tried everything but without success. It is the red PCB Kess.

Finally I've done it with Ktag via BDM connection, now it works.

Thanks for your help...