[Sven77]

Hello everyone.

Could someone please check my dump 93c86 from 3D0909139B kessy and confirm that its ok?

Thanx in advance.

[raffy haddad]

hello your dump not good
corrupted or wrong read
46978 pin code maybe you can try it
regards

[Sven77]

I used carprog for reading. someone else has removed the EEprom of this KESSY module before i can see it. So the dump is prob corrupt. how do i make a new dump using the ECU's EEprom dump??

[raffy haddad]

hello sven
try to make new key with the pincode that i post
and see if it adapte good
as test
because in your dump is missing vin and immo id and key data only the pincode appear and i am not sure if it belong to that kessy

[stunt_rider]

Hey guys, my kessy on myPhaeton is underwater, today i will put it out and try to rescue , if i must buy a new one can i clone it somehow with soldering the old immo chip on new keyys or is there any other way to fix this by myself? Its just very hard to get the Phaeton to the VW Dealer when nothing works on the car :/

[raffy haddad]

Hi
You can dry it first
Desolder eeprom and read if all is ok it should work by swapping it

[stunt_rider]

Hi
You can dry it first
Desolder eeprom and read if all is ok it should work by swapping it

Its dryed and cleaned, but how you can see how it was looking before it did not worked and one capacitor broke down from oxidation...



Which chip is the Eeprom chip ?

[raffy haddad]

You should look for 93c86 eeprom
Which model is your car? And what kind kessy 
Simmens or continental ?
Regards

[stunt_rider]

You should look for 93c86 eeprom
Which model is your car? And what kind kessy 
Simmens or continental ?
Regards

Okay thank you, i will look for this chip. 

Phaeton 5.0 V10 TDI 
Year is 2005 
Kessy is SIEMENS VDO (3D0 909 135 J)

[robot1]

Look after a kessy with same number and index,only this you can swap(eeprom inside) and it must work without adapted anything then