[jaki]

I'm a bit cinfused:
I have coded several F- series (incl F109 MSA Memory to on, but I annot uccess anymore:
In CAS there is no MSA_MEMORY anymore and I found that using TC_RESERVED_BYTE3_BIT5 do the job, but does not! It does not matter if i set this aktiv or not.
Is this feature deleted in newest psdzdata or what is wrong?

[DmitryHd]

Update software in CAS.

[jaki]

Update software in CAS.

So, if i would have old psdzdata, MSA should have worked ok.
Ok, I update CAS

[acolt]

no, the i level of that car is probably to low, i've seen this on very first f10 cars, there was no possibility without cas update

[jaki]

Ok, customer rejected s/w update (looses DDE power s/w).
Will come back later , if he gets recovery from tuning supplier to his DDE.

[willisodhiambo]

Is DDE a prerequisite for CAS update?

[acolt]

no, it is not, you can simply update only cas with esys

[vitalix]

no, it is not, you can simply update only cas with esys

add in HO-WORD => OMSA  and coding ecu CAS

[dragao_26]

no, it is not, you can simply update only cas with esys

add in HO-WORD => OMSA  and coding ecu CAS

i have the same problem, in may 520D 2010 bmw
 it seems that,  TC_MSA_MEMORY ---- TC_RESERVED_BYTE3_BIT5,    and a set activate but nothing happened, i even did this procedure but dindt work as well:
dd HO-Wort OMSA and VO Coding CAS:
1. E-Sys => Expert Mode => Coding
2. Read FA => Name FA "OMSA.xml" => Save FA => Edit FA (FA Opens up in FA-Editor)
3. In FA, Right-Click on HO-Wort => New => HO-Wort
4. Add "OMSA"
5. Right-Click on FA at top of VO => Calculate FP
6. Verify in Vehicle Profile [x] Aftermarket_Fitment => [xxxx] OMSA_WITHOUT_ENGINE_START_STOP
7. Save FA
8. E-Sys => Expert Mode => Coding
9. Load modified "OMSA.xml"
10. Right-Click on FA => Activate FA
11. Read SVT (VCM)
12. Right-Click on CAS (the ECU itself not the underlying CAFD) => Select CODE.

can anyone help to activate srta/stop last position?
im newbie in coding...

[Batje]

no, it is not, you can simply update only cas with esys

add in HO-WORD => OMSA  and coding ecu CAS

i have the same problem, in may 520D 2010 bmw
 it seems that,  TC_MSA_MEMORY ---- TC_RESERVED_BYTE3_BIT5,    and a set activate but nothing happened, i even did this procedure but dindt work as well:
dd HO-Wort OMSA and VO Coding CAS:
1. E-Sys => Expert Mode => Coding
2. Read FA => Name FA "OMSA.xml" => Save FA => Edit FA (FA Opens up in FA-Editor)
3. In FA, Right-Click on HO-Wort => New => HO-Wort
4. Add "OMSA"
5. Right-Click on FA at top of VO => Calculate FP
6. Verify in Vehicle Profile [x] Aftermarket_Fitment => [xxxx] OMSA_WITHOUT_ENGINE_START_STOP
7. Save FA
8. E-Sys => Expert Mode => Coding
9. Load modified "OMSA.xml"
10. Right-Click on FA => Activate FA
11. Read SVT (VCM)
12. Right-Click on CAS (the ECU itself not the underlying CAFD) => Select CODE.

can anyone help to activate srta/stop last position?
im newbie in coding...

Same solution for you as well, update CAS module and it's requisites, then you'll be able to code start/stop to default off or with memory function.

If you are a novice to coding i really recommend you to let someone else do it for you.
You can kill your car completely by human error, if you have to update your car let someone with experience do it.