[murat.62]

Have anyone a step by step install guide to use the icom emulator?

[beemerboy88]

Have anyone a step by step install guide to use the icom emulator?

Here's full step by step instructions I made a while ago for icom emulator v3.1 (includes screenshots). Obviously ignore the part where it tells you to insert the dongle (use snapshots instead).

[joecosta]

Hello, how to use with Bosch Mastertech VCI? Thanks.

[1234mbest]

Works with E-NET Cable??

[deno78]

Have anyone a step by step install guide to use the icom emulator?

Here's full step by step instructions I made a while ago for icom emulator v3.1 (includes screenshots). Obviously ignore the part where it tells you to insert the dongle (use snapshots instead).

sorry frend
have you a pdf full step by step pdf for connected a Clone Icom A2?
and how can Make a clean vmwar with Ista/d and P without this chinese shit Dongle
and wat all to self need for make a new Complete vmware image
1 xp
2 bmw bios?
3?
4?

[beemerboy88]

Have anyone a step by step install guide to use the icom emulator?

Here's full step by step instructions I made a while ago for icom emulator v3.1 (includes screenshots). Obviously ignore the part where it tells you to insert the dongle (use snapshots instead).

sorry frend
have you a pdf full step by step pdf for connected a Clone Icom A2?
and how can Make a clean vmwar with Ista/d and P without this chinese shit Dongle
and wat all to self need for make a new Complete vmware image
1 xp
2 bmw bios?
3?
4?

I think you have misunderstood my post.

The 3.42.40_2.53.3 vm in this thread is unprotected so does not need a dongle. It can be started by normal power on (no dongle or snapshots needed).

[deno78]

Have anyone a step by step install guide to use the icom emulator?

Here's full step by step instructions I made a while ago for icom emulator v3.1 (includes screenshots). Obviously ignore the part where it tells you to insert the dongle (use snapshots instead).

sorry frend
have you a pdf full step by step pdf for connected a Clone Icom A2?
and how can Make a clean vmwar with Ista/d and P without this chinese shit Dongle
and wat all to self need for make a new Complete vmware image
1 xp
2 bmw bios?
3?
4?

I think you have misunderstood my post.

The 3.42.40_2.53.3 vm in this thread is unprotected so does not need a dongle. It can be started by normal power on (no dongle or snapshots needed).

my problem is this and that when I use the snapshot start and if everything is up I go into the settings and dan in rheingold Change there also spoke and then I go in ista p and then catch the problems on he begins to charge and breaks and after a few times it goes and dan to get in and then the image flickers and there is the error message error- resolution
geöndert and that only ista p and I have that now a few times made ​​but it does not bring anything thrown out again laden and etpackt again and again measures the same and only ista p now I as admin wanted pure but there is the password as also the bios password so I have to put ask how I 'm doing myself a come plete version myself so I have that etlich and also the expert mode it is everything so messed up from china to russia america etc so I wanted to ask then I could much time and patience and also save gb because I need only German language .
I would be very grateful if someone would elfen me or is the possibility of the Ista / p to create a native best thanks in advance and the help.

[gt678]

Works perfekt with A2 Icom, thanks

[deno78]

Hello friends
can please give me a irgen to PM the administrator account
please because I have a huge problem with the screen resolution continuous error messages I think it is up to the different internal resolutions mount I have tried but the hard drives are read-only as well as the bios and irgen someone has the standart loggins replaced
So if someone could help me I would be very grateful
short for notebook Lenovo Thinkpad T410
8 Gb Ram
250 Gb SSD
1 TerraByte Hdd
as wirtuele machine I have the workstation 10
but so should really all go up I'm sure I already have downloaded and unpacked 5 times into new and thrown again I ask so without success to help
many greetings

[beemerboy88]

Hello friends
can please give me a irgen to PM the administrator account
please because I have a huge problem with the screen resolution continuous error messages I think it is up to the different internal resolutions mount I have tried but the hard drives are read-only as well as the bios and irgen someone has the standart loggins replaced
So if someone could help me I would be very grateful
short for notebook Lenovo Thinkpad T410
8 Gb Ram
250 Gb SSD
1 TerraByte Hdd
as wirtuele machine I have the workstation 10
but so should really all go up I'm sure I already have downloaded and unpacked 5 times into new and thrown again I ask so without success to help
many greetings

resolution of ista needs to stay at 1024x768.

To fix VMware display errors i.e flickering screen, goto edit > preferences > display > full screen & enable the center guest option