Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
23-04-2019, 13:15 PM,
(This post was last modified: 23-04-2019, 13:57 PM by ToNy68.)
Post: #41
|
|||
|
|||
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
(23-04-2019, 02:56 AM)viorelloj Wrote: Hi friends, "Part J" is correct? is anybody could share his DAS BIN folder ? or the CAL.ini because I cant do shortest with DAS, it doesnt communicate with ECU , it doest not list faults |
|||
23-04-2019, 23:09 PM,
(This post was last modified: 23-04-2019, 23:13 PM by medianjoe.)
Post: #42
|
|||
|
|||
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
(22-04-2019, 16:18 PM)ToNy68 Wrote: Device test is OK The device driver was installed correctly. Xentry opens DAS automatically if your vehicle is old model. Check if your model support passthru protocols, or check if the software you installed is passthru, not xdos. (23-04-2019, 02:56 AM)viorelloj Wrote: Hi friends, It should just work with W205 if you followed the device installation procedure and installed xentry passthru. Did you install it on Windows 10 x64? If it's installed on Windows 10 x32, it does not recognize W205. |
|||
24-04-2019, 10:37 AM,
Post: #43
|
|||
|
|||
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
Thanks medianjoe,
Drivers and software are installed in good condition. Software is xentry passthru. But can I check if vehicles is supported by passthru? I already tried with S220 model, and C203 Year 2002 But DAS doesn't read ECUs when performing short test. And when I try to access directly to a ECU I have error in DAS: Error (1.2)-2.518 So that's why I want to compare my cal.ini file with a working cal.ini. |
|||
24-04-2019, 10:50 AM,
Post: #44
|
|||
|
|||
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
I tried an 2001 slk 230 and the engine ecu was the only module read.
From what i understand only CAN cars can be read by vas5054, but this slk 230 was a KLINE. W223 W206
Xentry Ecom/C6/Sd C4 Help HHT native on 64x windows WIS 2021 AMG Menu Anti-Theft Pin Navigation Map Pin |
|||
24-04-2019, 12:20 PM,
Post: #45
|
|||
|
|||
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
How to know what kind of ECU it is?
Can or Kline |
|||
24-04-2019, 19:48 PM,
(This post was last modified: 24-04-2019, 19:52 PM by medianjoe.)
Post: #46
|
|||
|
|||
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
(24-04-2019, 10:37 AM)ToNy68 Wrote: Thanks medianjoe, SAE J2534 passthru for ECU/Transmission was mandated from model year 2004 (June 2003) by the US EPA. Since there was one year extension period, it should have been implemented no later than June 2004. Other chassis and body controllers depend on each manufacturers' schedule. |
|||
25-04-2019, 12:08 PM,
Post: #47
|
|||
|
|||
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
(24-04-2019, 12:20 PM)ToNy68 Wrote: How to know what kind of ECU it is? In xentry simulation or edit the cbf file with cxfviewer. W223 W206
Xentry Ecom/C6/Sd C4 Help HHT native on 64x windows WIS 2021 AMG Menu Anti-Theft Pin Navigation Map Pin |
|||
09-05-2019, 19:11 PM,
Post: #48
|
|||
|
|||
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
Does anyone know what error code 31 means ?
I have red light and error code 31. Device manager shows device with no issue |
|||
13-05-2019, 13:13 PM,
Post: #49
|
|||
|
|||
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
Hello,
see here and try to reinstall passthru drivers correctly : https://cartechnology.co.uk/showthread.php?tid=42373 - RED dot : PC <-> VAS5054A does not communicate. Something wrong on your driver. - YELLOW dot : PC <-> VAS5054A communicates. - GREEN dot : PC <-> VAS5054A <-> Vehicle communicates. If you have yellow light ( https://nsa40.casimages.com/img/2019/04/...413336.jpg ), that means drivers are ok , but you need a vehicle after year 2004 to have green light |
|||
13-05-2019, 20:53 PM,
Post: #50
|
|||
|
|||
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
Tx, I managed to get it working. There was a documentation error and some of the files were not where they were supposed to be. Once I moved them into the right place and re-started all was well
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content