Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

good evening I'm looking for Vcds 18.9.0 with activation please
27-11-2018, 12:41 PM,
Post: #21
RE: good evening I'm looking for Vcds 18.9.0 with activation please
Is there a specific china cable to look for? Any tips or links - PM please
Quote this message in a reply
27-11-2018, 13:07 PM,
Post: #22
RE: good evening I'm looking for Vcds 18.9.0 with activation please
(27-11-2018, 12:41 PM)R5JYY Wrote:  Is there a specific china cable to look for? Any tips or links - PM please

It's easy to find one, just keep in mind that it must have the Atmega162, FT232RQ, ATA6561 IC's (and some other parts) on board.
Reputation: +1 - Damex37 [+1]
Quote this message in a reply
[+] 2 users say Thank You to PhilipArt for this post
30-12-2018, 16:47 PM,
Post: #23
RE: good evening I'm looking for Vcds 18.9.0 with activation please
(27-11-2018, 12:41 PM)R5JYY Wrote:  Is there a specific china cable to look for? Any tips or links - PM please

make an account and wait for VIP activation from seller, after that you see vcds 

Original software and loader is on dvd whit software 18.9
Send file to seller and wait for activation file.

When VCDS software will give infamous message "[b]Interface not found[/b]", when performing: Options > Test.
MUST tick/check on "[b]Install 32-bit EXE on 64-bit System[/b]". 
Quote this message in a reply
11-03-2019, 18:10 PM,
Post: #24
RE: good evening I'm looking for Vcds 18.9.0 with activation please
The new version is 18.9.1, does the loader work with it? Or should I stick to 18.9.0?
Quote this message in a reply
11-03-2019, 19:15 PM, (This post was last modified: 11-03-2019, 20:12 PM by apoelistas.)
Post: #25
RE: good evening I'm looking for Vcds 18.9.0 with activation please
Original VCDs would pay overtime. Had 3 chinese VCDs clones spending say 75 dollars which I binned because I could not upgrade. Now have 3 vin VCDs hex v2, came with a nice case, which I am very happy with it especially that my antivirus does not find a trojan. Connects to the internet for additional experimental codings. Has all coding descriptions unlike the buggy clone (does not always work, can be unregistered when online, etc). Original can upgrade firmware while connected to my laptop only. Just bare this in mind before purchasing clones.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
[+] 2 users say Thank You to apoelistas for this post
11-03-2019, 20:36 PM,
Post: #26
RE: good evening I'm looking for Vcds 18.9.0 with activation please
Well, it worked. I just need a VW or Audi to see how far it can go. I would never do coding, I just need it for key or fob programming. If i have the PIN of course. smile
Quote this message in a reply
11-03-2019, 20:49 PM, (This post was last modified: 11-03-2019, 20:52 PM by apoelistas.)
Post: #27
RE: good evening I'm looking for Vcds 18.9.0 with activation please
newer VW Audi have to be programmed online through a secured database using odis-s online thus a registered odis account is required. not possible to program key or fob by yourself since 2008 or near that year with VCDs. Only for older vehicles.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
[+] 1 user says Thank You to apoelistas for this post
12-03-2019, 14:34 PM,
Post: #28
RE: good evening I'm looking for Vcds 18.9.0 with activation please
There's a few tools that do IMMO 4th & 5th through USB. Biggest one in the USA is Advanced Diagnostics. So that's not entirely true.
Quote this message in a reply
13-03-2019, 20:57 PM,
Post: #29
RE: good evening I'm looking for Vcds 18.9.0 with activation please
(11-03-2019, 18:10 PM)Damex37 Wrote:  The new version is 18.9.1, does the loader work with it? Or should I stick to 18.9.0?

I've tried this (with v7.2 loader) and at first i had an issue with CAN protocol, but after some changes between USB ports, everything was fine but not for a long time - the CAN wasn't stable.

I suggest you to stay with 18.9 for now (if you need the CAN protocol).


(12-03-2019, 14:34 PM)Damex37 Wrote:  There's a few tools that do IMMO 4th & 5th through USB. Biggest one in the USA is Advanced Diagnostics. So that's not entirely true.

@apoelistas, was totally correct about VCDS key programming functionality and that ODIS it's the official solution.
If you can follow any path, you have a lot of tools available that they can program keys (4/5 Immo) those days, even with all keys lost :)
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi VCDS 23.11.0 + LOADER benyclaudiu 8 1,850 Yesterday, 07:25 AM
Last Post: abartels
  PETKA 8.5 Activation Thread MrEdgar 1,612 127,595 17-04-2024, 20:06 PM
Last Post: V1T
  NEW VCDS all EU language 23.03.1 pitercie 5 452 17-04-2024, 06:11 AM
Last Post: Karlos777
  Activation of ODIS Engineering 12.2 - pls roanoke 5 197 05-04-2024, 11:01 AM
Last Post: shasse
ZVW I NEED ACTIVATION ODIS 7.2.1 Prince.bibers 3 168 04-03-2024, 06:42 AM
Last Post: Tomey
ZTAudi Request: full VCDS scan Audi S3 2007/2008 ries 0 100 29-02-2024, 20:05 PM
Last Post: ries
  MY VCDS COLLECTION - ALL YOU NEED I HOPE fantomel 77 62,813 25-02-2024, 11:34 AM
Last Post: XuLeTZ
  SVCI 6154A - Good Clone? rehatflogs 250 37,132 19-02-2024, 10:34 AM
Last Post: Porsche986
  MIB3 CarPlay activation Cart75 1 507 31-01-2024, 22:51 PM
Last Post: Vlasoff
ZVW 76 PLA / 3C Lane Change - Errors on VCDS scanning only spooky75 8 510 08-01-2024, 11:12 AM
Last Post: spooky75

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content