Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
HOW TO CLONE DELCO (OPEL) HSFI 2.1?
19-11-2018, 07:37 AM,
Post: #1
|
|||
|
|||
HOW TO CLONE DELCO (OPEL) HSFI 2.1?
Hi
how to clone opel delco hsfi 2.1 ecu? if i understand by that i have read, i have to read-write eeprom with carprog and the same to flash with fgtech-kess-mpps.... i am right? i have to do something else? Thank you.. |
|||
19-11-2018, 09:25 AM,
(This post was last modified: 19-11-2018, 09:25 AM by Ashraf6119.)
Post: #2
|
|||
|
|||
RE: HOW TO CLONE DELCO (OPEL) HSFI 2.1?
Best and easy way is to read pin code from both ECU using Carprog Tool and use Op-Com/Vaux-Com to reprogram it to your vehicle..............
If My Post Was Helpful
Than Please Click On Thanks & Rep.. |
|||
19-11-2018, 10:30 AM,
Post: #3
|
|||
|
|||
RE: HOW TO CLONE DELCO (OPEL) HSFI 2.1?
(19-11-2018, 09:25 AM)Ashraf6119 Wrote: Best and easy way is to read pin code from both ECU using Carprog Tool and use Op-Com/Vaux-Com to reprogram it to your vehicle.............. if i need to transfer the flash? (ecu with other s/w?) if i transfer flash and eeprom, i still need programming the ecu? or is plag & play? |
|||
20-11-2018, 19:10 PM,
Post: #4
|
|||
|
|||
RE: HOW TO CLONE DELCO (OPEL) HSFI 2.1?
no, you only need the carpass (you can remove it with carprog pin) and with op-com reset ecu with the original ecu pin and then code with the pin of the vehicle and voila, you do not need to transfer flash, if the ecu belongs to it engine.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content