[330d]

Well. Dealer recommends al units to be at same I level. But if you don’t notice anything wrong it’s probably ok.

That is my potential issue. My car is going in for some warranty work and I want to make sure everything is ok. Previously it went in they blamed the LCI HVAC panel was causing problems with coding. This was because I did not code the LCI panel as when i fitted it, everything worked so did not code.

You can't fit the LCI panel in IHKA you must replace IHKA with IHKA3 model that support LCI clima panel...

I have replaced like for like. As before the LCI panel has been working perfectly since i installed it a few months ago.

I went from this;


to this

Most recent CAFD's.

Thats interesting. Why cannot I see these CAFDS? All my available CAFDS look the same. 000_001_010

Anyone able to assist?

[Almaretto]

Thats interesting. Why cannot I see these CAFDS? All my available CAFDS look the same. 000_001_010

Because you are using older PSdZData. Picture I posted is from latest SDP.

[330d]

Just to update this thread, I did do the coding and it seemed to work as I got no error and the IHKA panel rebooted. All features working fine.

Now my question is, vehicle is going to the dealer as it has problem with rear camera. Is the car safe to go dealer with the retrofitted IHKA? Or will it cause problems?

Thank you

[330d]

Any assistance please?

Is the car safe to go dealer with the retrofitted IHKA? Or will it cause problems?

[Almaretto]

Any assistance please?

Is the car safe to go dealer with the retrofitted IHKA? Or will it cause problems?

It may cause problems if retrofitted part was not an option for car.

[330d]

Any assistance please?

Is the car safe to go dealer with the retrofitted IHKA? Or will it cause problems?

It may cause problems if retrofitted part was not an option for car.

How do I resolve this? The IHKA was standard fit to LCI cars. How do I ensure that I wont get any problems?

Also I have seen many F20 and F30's with LCI IHKA with no problems.