Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW E60 2004 CCC UPDATE WINKFP
20-11-2018, 16:43 PM,
Post: #11
RE: BMW E60 2004 CCC UPDATE WINKFP
Yes program with winkfp then code with ncsexpert. Last address A0 takes long time to update 1,5h or so
Quote this message in a reply
[+] 1 user says Thank You to TurboDriver for this post
20-11-2018, 17:03 PM,
Post: #12
RE: BMW E60 2004 CCC UPDATE WINKFP
(20-11-2018, 06:55 AM)snypertje Wrote:  
(19-11-2018, 21:31 PM)530d Wrote:  ccc winkfp programming:

1. CC6260 via KLINE* GW
2. CC3F60 via MOST_ASYNC ASK
3. CC4760 via MOST_ASYNC ANT
4. CC6360 via MOST_ASYNC BO
5. CCA060 via MOST_ASYNC CCC-A

this is important

1. CC6260 via KLINE* GW   ( so in Ediabas.ini    "Remote") With Icom Next...

Other in Ediabas.ini  "MOST_ASYNC"  With Icom Next and Most adapter...

And after programming with Winkfp, i must code all the modules with NcsExper?

Use EasyConnect to lock your icom

Type connection: REMOTE
IP: your ICOM IP
Mode: obd_625 - kline
Mode: MOST_ASYNC - most

remember, you must use power supply!
You must be patient. programming takes a long time, stops etc.
It is normal


Attached Files
EasyConnect_730x64.zip
File Type: .zip
Downloaded: 41 times
Size: 816.12 KB

Reputation: +1 - zalimhan74 [+1]
Quote this message in a reply
[+] 3 users say Thank You to 530d for this post
20-11-2018, 21:57 PM,
Post: #13
RE: BMW E60 2004 CCC UPDATE WINKFP
(20-11-2018, 17:03 PM)530d Wrote:  
(20-11-2018, 06:55 AM)snypertje Wrote:  
(19-11-2018, 21:31 PM)530d Wrote:  ccc winkfp programming:

1. CC6260 via KLINE* GW
2. CC3F60 via MOST_ASYNC ASK
3. CC4760 via MOST_ASYNC ANT
4. CC6360 via MOST_ASYNC BO
5. CCA060 via MOST_ASYNC CCC-A

this is important

1. CC6260 via KLINE* GW   ( so in Ediabas.ini    "Remote") With Icom Next...

Other in Ediabas.ini  "MOST_ASYNC"  With Icom Next and Most adapter...

And after programming with Winkfp, i must code all the modules with NcsExper?

Use EasyConnect to lock your icom

Type connection: REMOTE
IP: your ICOM IP
Mode: obd_625 - kline
Mode: MOST_ASYNC - most

remember, you must use power supply!
You must be patient. programming takes a long time, stops etc.
It is normal

Should it be        Mode: obd_ab625 ?
Quote this message in a reply
20-11-2018, 23:36 PM,
Post: #14
RE: BMW E60 2004 CCC UPDATE WINKFP
Yes smile I do not have access to easyconnect now
Quote this message in a reply
[+] 1 user says Thank You to 530d for this post
23-11-2018, 17:07 PM, (This post was last modified: 23-11-2018, 18:20 PM by Bimmer540.)
Post: #15
RE: BMW E60 2004 CCC UPDATE WINKFP
1. CC6260 via KLINE* GW              UPDATE OKAY  
2. CC3F60 via MOST_ASYNC ASK    UPDATE OKAY
3. CC4760 via MOST_ASYNC ANT    UPDATE OKAY
4. CC6360 via MOST_ASYNC BO     HARDWARE NUMBER FAULT?
5. CCA060 via MOST_ASYNC CCC-A   SEE PICTURE?


Must I set in   Ediabas.ini     Port    = 6802

[Image: 125gnk0.jpg]
Quote this message in a reply
21-04-2019, 20:38 PM,
Post: #16
RE: BMW E60 2004 CCC UPDATE WINKFP
Hi

You had solved your problem on the last two?

I had the same case a short time ago and not found the solution on this crash.

.:: Take your fingers out of the... and Rep +Thanks, it's not difficult ::.
VIN MAGIC PRO Beta Test Youtube

FeatureCode Carplay
Ilean Offline Licence
SSD Creator Licence
GenEsys Creator Licence
Quote this message in a reply
22-04-2019, 15:00 PM,
Post: #17
RE: BMW E60 2004 CCC UPDATE WINKFP
I don't know what's your knowledge, but I will describe from beggining:

Check ZBNR of BO and CCC-A in INPA.
Search in CC6360.HIS (psdzdata) for the newest ZB accordingly to one that you found in INPA.
In this case with CC6360, your ZBNR will be also your .0pa (hardware) version number.

Then go to folder CCA060 and the same open CCA060.HIS and search for the newest ZB. 
In this case you've got hardware(.0pa) and software (0.da) files. When you've got the newest ZB, open CCA060.DAT and you have in the columns:
ZB-NR (your newest ZB), HW-NR (your .0pa file), SW-NR (your .0da file).

If programming failed for the first time while using comfort mode then you need to setup kfp in expert mode. In attachment you have an instruction. 

Just don't forget to copy files to "DEVELOP" folder, and change numbers in "coapi.ini". There was a thread on forum when author while programming IHKA forget to copy .0pa and .0da files to DEVELOP.


Attached Files
winKFP expert mode.txt
File Type: .txt
Downloaded: 55 times
Size: 70 bytes


Only BMW services:

Remote coding/programming - E, F, G serie
HDD change, Carplay, Screen mirroring activation
FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS
Remote reset 8HP ISN F serie
ELV disable for CAS3, 3+
Quote this message in a reply
22-04-2019, 16:49 PM,
Post: #18
RE: BMW E60 2004 CCC UPDATE WINKFP
The problem for this method is that there is nothing for the displayed zb.

I have for CCA060 in INPA: ZB No 9160708

In CCA060.HIS:

9150189,9160708,00,KI
9160708,9150621,01,KI

And none of these numbers present in CCA060.DAT

;SG-TYP: CCA060
;ZB-NR  TYP-NR  HW-NR  IX SW-NR     AM          PIN S CS
9185584,0000000,9185581,A,9185585DA,0FFFFFFFFFD,000,1 A
9193874,0000000,9193871,A,9193875DA,0FFFFFFFFFD,000,1 1
9185596,0000000,9185581,A,9185597DA,0FFFFFFFFFD,000,1 O
9193886,0000000,9193871,A,9193887DA,0FFFFFFFFFD,000,1 F
9185598,0000000,9185581,A,9185599DA,0FFFFFFFFFD,000,1 0
9193888,0000000,9193871,A,9193889DA,0FFFFFFFFFD,000,1 R
9185582,0000000,9185581,A,9185583DA,0FFFFFFFFFD,000,1 Y
9193872,0000000,9193871,A,9193873DA,0FFFFFFFFFD,000,1 P
9185592,0000000,9185581,A,9185593DA,0FFFFFFFFFD,000,1 0
9193882,0000000,9193871,A,9193883DA,0FFFFFFFFFD,000,1 R
9185588,0000000,9185581,A,9185589DA,0FFFFFFFFFD,000,1 Y
9193878,0000000,9193871,A,9193879DA,0FFFFFFFFFD,000,1 P
9185601,0000000,9185600,A,9185602DA,0FFFFFFFFFD,000,1 A
9197798,0000000,9197797,A,9197800DA,0FFFFFFFFFD,000,1 J
9185586,0000000,9185581,A,9185587DA,0FFFFFFFFFD,000,1 M
9193876,0000000,9193871,A,9193877DA,0FFFFFFFFFD,000,1 D
9185590,0000000,9185581,A,9185591DA,0FFFFFFFFFD,000,1 O
9193880,0000000,9193871,A,9193881DA,0FFFFFFFFFD,000,1 F
9185594,0000000,9185581,A,9185595DA,0FFFFFFFFFD,000,1 C
9193884,0000000,9193871,A,9193885DA,0FFFFFFFFFD,000,1 3

So which file to determine for the expert mode?

Same problem for CC6360:

I have for CC6360 in INPA: ZB No 9160572

In CC6360.HIS:

9160572,9150606,01,FL
9147880,9160572,00,FL

In CC6360.DAT: 

;SG-TYP: CC6360
;ZB-NR  TYP-NR  HW-NR  IX SW-NR     AM          PIN S CS
9185624,0000000,9185624,A,0000000DA,0FFFFFFFFFD,000,1 Q
9185622,0000000,9185622,A,0000000DA,0FFFFFFFFFD,000,1 E
9185623,0000000,9185623,A,0000000DA,0FFFFFFFFFD,000,1 K

.:: Take your fingers out of the... and Rep +Thanks, it's not difficult ::.
VIN MAGIC PRO Beta Test Youtube

FeatureCode Carplay
Ilean Offline Licence
SSD Creator Licence
GenEsys Creator Licence
Quote this message in a reply
22-04-2019, 23:07 PM, (This post was last modified: 22-04-2019, 23:10 PM by Matthew53.)
Post: #19
RE: BMW E60 2004 CCC UPDATE WINKFP
(22-04-2019, 16:49 PM)scorpium59 Wrote:  The problem for this method is that there is nothing for the displayed zb.

I have for CCA060 in INPA: ZB No 9160708

In CCA060.HIS:

9150189,9160708,00,KI
9160708,9150621,01,KI

And none of these numbers present in CCA060.DAT

;SG-TYP: CCA060
;ZB-NR  TYP-NR  HW-NR  IX SW-NR     AM          PIN S CS
9185584,0000000,9185581,A,9185585DA,0FFFFFFFFFD,000,1 A
9193874,0000000,9193871,A,9193875DA,0FFFFFFFFFD,000,1 1
9185596,0000000,9185581,A,9185597DA,0FFFFFFFFFD,000,1 O
9193886,0000000,9193871,A,9193887DA,0FFFFFFFFFD,000,1 F
9185598,0000000,9185581,A,9185599DA,0FFFFFFFFFD,000,1 0
9193888,0000000,9193871,A,9193889DA,0FFFFFFFFFD,000,1 R
9185582,0000000,9185581,A,9185583DA,0FFFFFFFFFD,000,1 Y
9193872,0000000,9193871,A,9193873DA,0FFFFFFFFFD,000,1 P
9185592,0000000,9185581,A,9185593DA,0FFFFFFFFFD,000,1 0
9193882,0000000,9193871,A,9193883DA,0FFFFFFFFFD,000,1 R
9185588,0000000,9185581,A,9185589DA,0FFFFFFFFFD,000,1 Y
9193878,0000000,9193871,A,9193879DA,0FFFFFFFFFD,000,1 P
9185601,0000000,9185600,A,9185602DA,0FFFFFFFFFD,000,1 A
9197798,0000000,9197797,A,9197800DA,0FFFFFFFFFD,000,1 J
9185586,0000000,9185581,A,9185587DA,0FFFFFFFFFD,000,1 M
9193876,0000000,9193871,A,9193877DA,0FFFFFFFFFD,000,1 D
9185590,0000000,9185581,A,9185591DA,0FFFFFFFFFD,000,1 O
9193880,0000000,9193871,A,9193881DA,0FFFFFFFFFD,000,1 F
9185594,0000000,9185581,A,9185595DA,0FFFFFFFFFD,000,1 C
9193884,0000000,9193871,A,9193885DA,0FFFFFFFFFD,000,1 3

So which file to determine for the expert mode?

Same problem for CC6360:

I have for CC6360 in INPA: ZB No 9160572

In CC6360.HIS:

9160572,9150606,01,FL
9147880,9160572,00,FL

In CC6360.DAT: 

;SG-TYP: CC6360
;ZB-NR  TYP-NR  HW-NR  IX SW-NR     AM          PIN S CS
9185624,0000000,9185624,A,0000000DA,0FFFFFFFFFD,000,1 Q
9185622,0000000,9185622,A,0000000DA,0FFFFFFFFFD,000,1 E
9185623,0000000,9185623,A,0000000DA,0FFFFFFFFFD,000,1 K

You simply need to "follow" newer number so:

9160708, 9150621
(Then search for 9150621)
9150621, 9164326
(again with 9164326)
9164326, 9170761
9170761, 9174576
9174576, 9180876
9180876, 9185594
9185594, 9193884    (9183884 is the newest ZBNR)

The same for CC6360.

Only BMW services:

Remote coding/programming - E, F, G serie
HDD change, Carplay, Screen mirroring activation
FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS
Remote reset 8HP ISN F serie
ELV disable for CAS3, 3+
Reputation: +1 - scorpium59 [+1]
Quote this message in a reply
[+] 1 user says Thank You to Matthew53 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  CCC flash WINKFP ICOM BimmerSLO 1 12 3 minutes ago
Last Post: zero9
  BMW F650gs dme/ecu update Liteace 10 90 7 hours ago
Last Post: HaakonA
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,488 27-03-2024, 10:39 AM
Last Post: MINIGP1610
  need update & mod VIN from FRM ? ka_rai 7 189 25-03-2024, 01:06 AM
Last Post: armenh7
XZBMW WinKFP can't find ZUSB 6957356 andre426hemi 4 206 25-03-2024, 00:40 AM
Last Post: armenh7
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,905 24-03-2024, 11:29 AM
Last Post: Twointje
XZBMW Update ISTA 4.39.20 SQLiteDBs Italian Language diman64 8 748 09-03-2024, 20:18 PM
Last Post: diman64
XZBMW Update VIN in VCM through esys TIGHTFIN 10 1,156 05-03-2024, 11:26 AM
Last Post: oros
XZBMW Solved ✔ Cic update on E series alsamaraee 16 791 28-02-2024, 11:38 AM
Last Post: alsamaraee
XZBMW Programming_ Changes with xx-xx I level update that are perceptible to the customer shawnsheridan 10 1,926 22-02-2024, 12:17 PM
Last Post: bmchicago

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content