Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

[SOLVED] BMW E53 2000 AIRBAG FAULT
21-11-2018, 15:21 PM, (This post was last modified: 07-12-2018, 16:10 PM by Bimmer540.)
Post: #1
[SOLVED] BMW E53 2000 AIRBAG FAULT
After I remove the airbag unit from the right front door,
I get error codes and can not delete them.

000006 Side Airbag front-right (resistance too high)  I have tried another unit but the same error.

0000F0 Internal fault control unit
Quote this message in a reply
21-11-2018, 15:36 PM,
Post: #2
RE: BMW E53 2000 AIRBAG FAULT
Did You destroy connector?
Quote this message in a reply
21-11-2018, 15:39 PM,
Post: #3
RE: BMW E53 2000 AIRBAG FAULT
(21-11-2018, 15:36 PM)inspi1981 Wrote:  Did You destroy connector?

no, it could very easily pop out.
Quote this message in a reply
21-11-2018, 16:10 PM,
Post: #4
RE: BMW E53 2000 AIRBAG FAULT
then check resistence with diag
Quote this message in a reply
21-11-2018, 16:17 PM,
Post: #5
RE: BMW E53 2000 AIRBAG FAULT
Could it be that the MRS module gives this problems?
Quote this message in a reply
21-11-2018, 16:47 PM,
Post: #6
RE: BMW E53 2000 AIRBAG FAULT
You cant delete it if you have fault: 
0000F0 Internal fault control unit

you must find someone that can clear crash data and then you can....
Quote this message in a reply
21-11-2018, 16:48 PM, (This post was last modified: 21-11-2018, 16:48 PM by Bimmer540.)
Post: #7
RE: BMW E53 2000 AIRBAG FAULT
(21-11-2018, 16:47 PM)kuks Wrote:  You cant delete it if you have fault: 
0000F0 Internal fault control unit

you must find someone that can clear crash data and then you can....

Why is it crashed?
Quote this message in a reply
21-11-2018, 16:59 PM, (This post was last modified: 21-11-2018, 16:59 PM by Enabled.)
Post: #8
RE: BMW E53 2000 AIRBAG FAULT
It gets internal fault when there is too much frequency of an error code, shorts in accessory components, wrong components plugged in, crash data, or the cold caused a true hardware fault in the airbag module.
Very common of Temic MRSZ3 module.

It can be cleared only with MCU reading/writing tools. Error can easily come back when the module is bad.
Quote this message in a reply
[+] 1 user says Thank You to Enabled for this post
21-11-2018, 18:30 PM,
Post: #9
RE: BMW E53 2000 AIRBAG FAULT
(21-11-2018, 16:47 PM)kuks Wrote:  You cant delete it if you have fault: 
0000F0 Internal fault control unit

you must find someone that can clear crash data and then you can....

Can I use BMW Scanner 1.4.0 for this problem?
Quote this message in a reply
21-11-2018, 18:33 PM,
Post: #10
RE: BMW E53 2000 AIRBAG FAULT
No, BMW scanner will not do it.

The module is very likely the "Temic MRSZ3" which no tools can do via obd or diagnostics line. On the main board only.
Quote this message in a reply
[+] 1 user says Thank You to Enabled for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
0Scope citroen c3 airbag crash kila68 1 32 02-05-2024, 13:12 PM
Last Post: renia1983
ZSkoda 2008 c220 diesel w204 airbag issues al70 2 33 01-05-2024, 22:32 PM
Last Post: al70
  Mini cooper r60 internal error airbag francescomicdon 2 38 30-04-2024, 20:10 PM
Last Post: francescomicdon
  Ssangyong Tivoli XLV AIRBAG coding ? roanoke 0 21 30-04-2024, 13:40 PM
Last Post: roanoke
  PINOUT ECU AIRBAG 5wa959655a version VW40 bmw080 2 49 30-04-2024, 13:38 PM
Last Post: superjet
PPeugeot Peugeot 5008 airbag need clear 530d 1 37 29-04-2024, 11:41 AM
Last Post: renia1983
ZTAudi Audi Q8 Airbag VW32 Crash check MahoJohn 0 54 26-04-2024, 07:56 AM
Last Post: MahoJohn
  2015 jeep renegade used airbag module. Autorepair12 1 49 26-04-2024, 06:23 AM
Last Post: renia1983
PPeugeot PEUGOET 406 AIRBAG REPAIR spoool 2 145 25-04-2024, 00:23 AM
Last Post: spoool
PPeugeot Crash Airbag Peugeot 1007 Temic filxomor 1 54 24-04-2024, 14:32 PM
Last Post: dragon100

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content