[Enabled]

Can someone please virginize this BMW ME7.2 fullflash?


I am unsure if the modifications done by 'BMW Immo ID Editor' software is any good. I do not trust it.

Much appreciated.

[PhilipM]

ISN is also near the top of the file too.

[Enabled]

Seems to match what BMW IMMO ID Editor does, so I guess it is also good via that program.

Just curious about the same ISN code at 0x3FD3C?

I will flash and report back if it worked!
Many thanks.

[PhilipM]

Well spotted, there's another copy of the UIF there too.
FF all of those, or you could change the ISN in the EWS to match too.

[Blasteraaa]

Friends please help me too i cant open driver in ECM Titanium of my car i tried on 3 laptop and 3 car one of them laptop worked perfectly but when i reinstalled windows and changed HDD i cant open any driver help please...

[PhilipM]

Get winols, and look on tuning forums for map locations.
ECM is like a toy, it only shows you a few maps, often with wrong names and important things missing.

[Enabled]

Ya, I installed ECM Titanium 1.61 once, it was so bad, I uninstalled it within 10 minutes.
I hear newer versions were way better. But knowing what you are doing is more worth it, so it sort of forces you to learn.

---

Car started fine.

Seriously though... the reason why I thought it was wrong at first is that the ISN was 17 D0 17 D0 17 D0... rolling code..
What are the chances? There are so many combinations, and it's that!?

[PhilipM]

The rolling codes are in the eeprom, they are calculated by last rolling code vs some function of the ISN.

If the ISNs are OK, you can reset the rolling codes.
You will often see the ISN repeated 3 times, or sometimes split with its complement in the middle.

[weshoo]

Can someone please virginize this BMW ME7.2 fullflash?


I am unsure if the modifications done by 'BMW Immo ID Editor' software is any good. I do not trust it.

Much appreciated.

would  u please tell the software do u have used to flash full bin file at boot mode