Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Can't load fake FSC SIG_CHECK_FAILURE
25-11-2018, 22:24 PM,
Post: #1
|
|||
|
|||
Can't load fake FSC SIG_CHECK_FAILURE
Hello,
So I have an ID5 unit on which I applied a HU work tool 3.9 BIN file few weeks ago, all was good Now I need to change the VIN, so I VO coded the unit with the new VIN, gives me an error that's OK, in order to apply newly generated BIN with new matching VIN. Problem is BIN don't load. Unit does not reboot. I just flashed the unit, it has istep 11.2017, so BIN should run. Unit was never flashed to 11.2018 istep, in case in makes a difference. All FSC are naturally having that status now : FSCStatus rejected So I tried to load FSC files individually, like sometimes it won't change VIN until you do so, but every single one gives me the following error: code: RoutineControl returned negative response description: service Routine Control Verify FSC returned positive response with with result status = SIG_CHECK_FAILURE; LinkName: HU_NBT2_63_ETHERNET severity: ERROR So I reflashed unit for a 2nd time with new VIN too now, so both CPS and VIN are matching now Still unable to load those FSC files and BIN don't load I generated BIN several times, won't work for that unit, works on others. Any idea guys what is going on? |
|||
26-11-2018, 06:45 AM,
Post: #2
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
Unit is at I-level 11-2018?
|
|||
26-11-2018, 07:13 AM,
Post: #3
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
Have you tried :
Tool32 - NBtevo.prg _STEUERN_DELETE_PERSISTENCY_INTEL _STEUERN_DELETE_PERSISTENCY_INTEL_PLUS_SWT _STEUERN_DELETE_PERSISTENCY_JACINTO add as commet SWT. Run all 3, reset unit try again... |
|||
26-11-2018, 09:55 AM,
Post: #4
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
Nope BIN files wont run, any of them
Istep is 11.2017. CAFD is ...030_168 |
|||
26-11-2018, 10:40 AM,
Post: #5
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
Really stupid things to check but,
Cafd is there even after reboot? Check if HDD is working and transport mode deactivated Do you lock to vin or serial? |
|||
26-11-2018, 12:19 PM,
Post: #6
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(26-11-2018, 10:40 AM)larshutten Wrote: Really stupid things to check but, Yes CAF fine. VO and fdl code fine. All green. Unit works fine, execpt all fsc being rejected. BIN file is VIN locked. Even BIN file to restore original FSC dont work. Dont execute. HDD works fine. Not in transport mode |
|||
26-11-2018, 12:47 PM,
Post: #7
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
I expect you have done this already but did you write the vIn using WRITEDATABYIDENTIFIERVIN ?
I had a unit that wouldnt load .BIN files last week, killing the power for 10 mins and trying again got it working. I suspect it isn't the issue. have you flattened the unit back to BTLD 00001FFD_000_000_001 with HU_SPECIAL_NBTEVO_CLEAR_V850 job in Tool32? |
|||
26-11-2018, 12:51 PM,
Post: #8
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(26-11-2018, 12:47 PM)Wibbles Wrote: I expect you have done this already but did you write the vIn using WRITEDATABYIDENTIFIERVIN ? It is id4 unit converted straight to id5 after killing v850 I was thinking maybe go back to id4 first then load new BIN then convert to id5 and apply new BIN again with same VIN. No I did not write VIN manually but I will try thanks |
|||
26-11-2018, 13:52 PM,
Post: #9
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
when the patch is locked with the VIN., it is necessary to change the long vin and coding vin before applying it.
BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
26-11-2018, 14:04 PM,
Post: #10
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(26-11-2018, 13:52 PM)duckdonald Wrote: when the patch is locked with the VIN., it is necessary to change the long vin and coding vin before applying it. Like I said both VIN and CPS do match. Unit VO coded to new VIN ok I reflashed unit with new VIN etc so all good on that side. Will try to manually write VIN though will see |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content