Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
coding control cruise e84
26-11-2018, 19:20 PM,
Post: #1
|
|||
|
|||
coding control cruise e84
hello everyone
I'm trying to code a bmw e84 of 2012 to retrofitcruise control on it. the module that I have put is the reference 9123051 that is what makes me realoem. I have tried with $ 540 and $ 544 encoding both DSC and KOMBI without any error, but it does not work. do you have to code some more module ?? thanks in advance |
|||
26-11-2018, 19:36 PM,
Post: #2
|
|||
|
|||
RE: coding control cruise e84
maybe you have the wrong part installed? there was a differencebetween 6 cyl and 4 cyl engines
>> BMW FSC codes service <<
Carplay Activation ~ EVO / EntryNav2 OEM FSC Region Change ~ MGU EVO EntryNav2 KAFAS, NiVi, MGU, MRR ~ FSC retrofit codes |
|||
26-11-2018, 19:40 PM,
Post: #3
|
|||
|
|||
RE: coding control cruise e84
some X1 no 4wd, have a dsc that can not stand the cruise.
BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
26-11-2018, 20:42 PM,
Post: #4
|
|||
|
|||
RE: coding control cruise e84
|
|||
28-11-2018, 07:55 AM,
Post: #5
|
|||
|
|||
RE: coding control cruise e84
the correct code is 544, may not display the speed set on the kombi (low model), but exceeded 30 km/h the cruise works properly! if it does not work it means that the purchased part is faulty
|
|||
02-12-2018, 21:49 PM,
Post: #6
|
|||
|
|||
RE: coding control cruise e84
(28-11-2018, 07:55 AM)smercki Wrote: the correct code is 544, may not display the speed set on the kombi (low model), but exceeded 30 km/h the cruise works properly! if it does not work it means that the purchased part is faulty thanks for answering really does not do anything when moving the lever. that has xdrive system can influence? |
|||
12-12-2018, 11:37 AM,
Post: #7
|
|||
|
|||
RE: coding control cruise e84
Hello :
$ 544 FA_write both CAS and FRM. then SG_codieren DSC、KOMBI、CAS、FRM and JBE . |
|||
12-12-2018, 12:07 PM,
Post: #8
|
|||
|
|||
RE: coding control cruise e84
After coding try: "loeschen_kli_fgr_variante" in dme/dde, wait up to 10 minutes and clear fault codes after that
|
|||
15-12-2018, 11:30 AM,
(This post was last modified: 15-12-2018, 11:33 AM by fitacuevas.)
Post: #9
|
|||
|
|||
RE: coding control cruise e84
thank you all, everything is working. the lever did not work well. I have installed another with the same reference number and alehop !!.
(12-12-2018, 12:07 PM)Freddy1 Wrote: After coding try: "loeschen_kli_fgr_variante" in dme/dde, wait up to 10 minutes and clear fault codes after that out of curiosity ... what works does "loeschen_kli_fgr_variante"? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content