[TizWoz]

Guys after After image recovery, I got "A disk read error occurred" after reboot, do I have to install windows xp before recovery? Or recover with formated laptop?

0
you use the program acronis (usually boot CD) to burn the image to EMPTY HDD.

[andrius]

Hi, i have a problem, Rheingold starts no problemo but ISTA/P is not willing to start it connects to my ICOM, show terminal 30 and 15, but then during vin identification it throws:
94201 Technical service initialization failed
3017 (CoAPi) coapiKflinit() failed
maybe someone could help many thanks

[kawkaw]

Hi all

Ista /p and Ista /d work very nice with Icom a2 clone and Dell E6420

I change mac adress on XML file and i put xml file for support icom a2 clone.

[Modded e30]

Guys after After image recovery, I got "A disk read error occurred" after reboot, do I have to install windows xp before recovery? Or recover with formated laptop?

0
you use the program acronis (usually boot CD) to burn the image to EMPTY HDD.

Thanks, going to try again.

[Modded e30]

TizWoz

I got this message

[Modded e30]

^^ And no boot at all, notebook is IBM x201t

[TizWoz]

^^ And no boot at all, notebook is IBM x201t

is that while trying to recover the image ?

if it is I suspect you may have a corrupt download

either that or your doing something wrong.

What size is your files once extracted ? maybe someone can see if there extracted file is same size total.

[Modded e30]

I didn't see what was the extracted size, but today I successfully installed it on HP notebook, but the Hp was very slow. I want it to be in the IBM x201t tablet. I swapped the HDD from the Hp to the IBM but no success, I got "A disk read error occurred" after reboot.

---

And yes, I got that PCI driver error while trying to recover the image.

Did someone get it to run on IBM x201t?

[miranri]

Working great on a dell e6400 ,,, a little slow .. pc 4 gig of ram dual core 2.8 ista d ... still need to test ista p ,, with icom a1 head ..

---

is there a image of this running on windows 7 ......

[Wesk18]

BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image

New diagnostic system of BMW vehicles. It works with E and F series. BMW Rheingold is the replacement of the diagnostic program
BMW ISTA/D versions 2.XX. At this time, supplies to the official dealer services.

The programming system ISTA/P is an application of ISPI network. With ISTA/P you can do coding, programming and replacement of control units.

Date: 03/2014
Version: D3.42.40 & P2.52.40
System requirements: Dual-core processor, min. RAM 4GB
Language: Multilanguage

Nice, just curious which is the latest official version of ista/p and ista/d