[Mooney Driver]

Ignore Microsoft loopback lan and wifi lan connections.

Your laptop ethernet adaptor is the one that needs to be named Eth0.

then you need to change the ISID mac address to match the mac address of your Ethernet adaptor. Use this procedure:

1. Open a command prompt, type in ipconfig/all and write down the mac address of your Ethernet adaptor.

2. Now change the ISID mac address in the following files, to match the one from step 1 (using notepad or xml editor):

p:\apps\wsm\apps\agent\data\DeviceInventory-ISIDR20000032.xml
p:\apps\wsm\apps\manager\data\DeviceInventory-ISIDR20000032.xml
p:\apps\wsm\apps\manager\data\PXEBootDevices.xml

3. Reboot your computer and after a few minutes ISTA should load up ok (red writing may take a couple of minutes to clear)

I've got it working following these instructions, but it disables my wireless connection whenever WSM starts. I've tried messing with the <internal interface> section to point it to the loopback adapter, but then I'm back to the red "configuring network" text. I tried deleting the<internal interface> through </internal interface> section, but it was automatically added again the next time WSM launched. Is there any way to keep a working wireless connection with this image?

Thanks