[JaVlk]

hello, I have a BMW e61 prelci 2004 and I made front and rear lights from lci but I still can't get Adaptive Headlights, what do I have to code in lm2

you have to unpin the AHL Module (passenger side) and pin the wires directly into LM2

AHL --> PIN2 --> PIN38 LM2
AHL --> PIN3 --> PIN37 LM2
AHL --> PIN5 --> PIN27 LM2
AHL --> PIN6 --> PIN7  LM2
AHL --> PIN8 --> PIN55 LM2
AHL --> PIN9 --> PIN54 LM2
AHL --> PIN15 --> PIN66 LM2
AHL --> PIN16 --> PIN46 LM2
AHL --> PIN17 --> PIN76 LM2
AHL --> PIN18 --> PIN75 LM2

and also PT-CAN

AHL --> PIN13 --> PIN71 LM2
AHL --> PIN14 --> PIN72 LM2

Change TimeCriteria to #0307 (temporary) and code LM2 or to #0308 then you will have variable light distribution if you wish

And you need SMC2 Modules for adaptive....can´t use the SMC1 form pre-LCI adaptive hedalight

The pinning above is ONLY if you have pre-LCI WITH AHL and then you retrofitted to LCI WITH AHL...

hi so far everything seems to be working but I'm getting the error 1.9CC5 LM: Missing LIN message (RLS)

and I have some unconnected cables left from the original ahl, I don't connect them anywhere anymore

[Mwahab]

RLS= Rain lights sensor.

[zeronoo]

E60 LCI use different RLS than prelci (new-lin, old-can), try to code hud on LM

[JaVlk]

E60 LCI use different RLS than prelci (new-lin, old-can), try to code hud on LM

you don't know what exactly to change in coding lm2

[NeRkO20]

read out the coding data from LM2....search for HUD (or similar) and set it from nicht_aktiv to aktiv

[dumitru.o]

hello, I have a BMW e61 prelci 2004 and I made front and rear lights from lci but I still can't get Adaptive Headlights, what do I have to code in lm2

you have to unpin the AHL Module (passenger side) and pin the wires directly into LM2

AHL --> PIN2 --> PIN38 LM2
AHL --> PIN3 --> PIN37 LM2
AHL --> PIN5 --> PIN27 LM2
AHL --> PIN6 --> PIN7  LM2
AHL --> PIN8 --> PIN55 LM2
AHL --> PIN9 --> PIN54 LM2
AHL --> PIN15 --> PIN66 LM2
AHL --> PIN16 --> PIN46 LM2
AHL --> PIN17 --> PIN76 LM2
AHL --> PIN18 --> PIN75 LM2

and also PT-CAN

AHL --> PIN13 --> PIN71 LM2
AHL --> PIN14 --> PIN72 LM2

Change TimeCriteria to #0307 (temporary) and code LM2 or to #0308 then you will have variable light distribution if you wish

And you need SMC2 Modules for adaptive....can´t use the SMC1 form pre-LCI adaptive hedalight

The pinning above is ONLY if you have pre-LCI WITH AHL and then you retrofitted to LCI WITH AHL...

hi so far everything seems to be working but I'm getting the error 1.9CC5 LM: Missing LIN message (RLS)

and I have some unconnected cables left from the original ahl, I don't connect them anywhere anymore

that is because wrong coding of the LM2. you have coded the LM2 as for LCI not as for LCI retrofit !