Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Inpa/tool32 with Yellow GT1 Interface
03-12-2018, 12:36 PM,
Post: #1
|
|||
|
|||
Inpa/tool32 with Yellow GT1 Interface
Hi,
Is it possible to use Inpa/Tool32 on Windows 7 with the old yellow Dis/GT1 interface? I would like to try to pair a used E31 Ekm - Kombi using tool32 however Icom and usb cables cannot communicate to the Ekm. GT1 communicates fine. Thanks for any input guys. |
|||
03-12-2018, 13:08 PM,
Post: #2
|
|||
|
|||
RE: Inpa/tool32 with Yellow GT1 Interface
yes, is possible, setting is the same opps base.
BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
03-12-2018, 13:12 PM,
Post: #3
|
|||
|
|||
RE: Inpa/tool32 with Yellow GT1 Interface
Hi, could you explain a bit more? Thanks
|
|||
03-12-2018, 13:38 PM,
(This post was last modified: 03-12-2018, 13:58 PM by duckdonald.)
Post: #4
|
|||
|
|||
RE: Inpa/tool32 with Yellow GT1 Interface
configure ediabas
- Interface to "REMOTE" - Remote IP addresse to "192.168.68.xx" (192.168.68.28 IP of the yellow head, if I remember correctly ) - Remote Port to 6801 EDIABAS.ini TCP/IP Configuration [TCP] ;================================================= ============================ ;----------------------------------------------------------------------------- ; RemoteHost ; Description : server address/name ; Default = diaghead RemoteHost = 192.168.68.xx ;----------------------------------------------------------------------------- ; Port ; Description : IP communication port ; Value : 1000 < port < 30000 ; Default = Port = 6801 it was also used diahead, but I do not know where to download it, .. and not if it was indispensable, .. it's been a long time since I used GT1 BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
03-12-2018, 15:47 PM,
(This post was last modified: 03-12-2018, 15:58 PM by tonemoz.)
Post: #5
|
|||
|
|||
RE: Inpa/tool32 with Yellow GT1 Interface
Ok, changed settingis in ediabas.ini to that of my diaghead (192.168.68.19)
Still unable to connect via inpa, the activity light on the diaghead constantly flashes (goes solid when connected to Gt1) If I change the lan adapter ip to 192.168.68.1 I can ping the head ok. Is there someway I need to reserve the head? ( similar to itool radar?) Would it be better to try with an ops head rather than the GT1 Dk head? |
|||
03-12-2018, 16:30 PM,
Post: #6
|
|||
|
|||
RE: Inpa/tool32 with Yellow GT1 Interface
for the ops, just itoolradar or easyconnect.
I honestly do not remember very well ,. but I know that ifhsrv32 was launched to open communication with the GT1. I have to watch if I still have a laptop configured with a yellow head. BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
04-12-2018, 16:50 PM,
(This post was last modified: 04-12-2018, 16:50 PM by tonemoz.)
Post: #7
|
|||
|
|||
RE: Inpa/tool32 with Yellow GT1 Interface
So, the OPS is not a full ads compatible head then, as when connected to the GT1 can only see the same ecus as Ista.
Still unable to lock the DK (edic?) head to use with inpa, is the IFH-service supposed to make that connection? As that doesn't seem to run on windows 7 ( seems to open on xp desktop, not near the car though) Have installed an earlier version of standard tools with edic support, but do I need to run this on an xp machine? Thanks for any guidance. |
|||
05-12-2018, 10:10 AM,
Post: #8
|
|||
|
|||
RE: Inpa/tool32 with Yellow GT1 Interface
(03-12-2018, 15:47 PM)tonemoz Wrote: Ok, changed settingis in ediabas.ini to that of my diaghead (192.168.68.19) start gt1 in vm on same pc then inpa/ncs/etc to lock gt1 yellow head first, i did that many years ago and work 100% |
|||
05-12-2018, 12:11 PM,
Post: #9
|
|||
|
|||
RE: Inpa/tool32 with Yellow GT1 Interface
Ok I will try this. Does anyone know the correct settings to successfully connect the diaghead to the vmware GT1? The diaghead is visble in the GT1 connection manager, but always says the connection could not be created.
Thank you. |
|||
30-01-2019, 19:38 PM,
Post: #10
|
|||
|
|||
RE: Inpa/tool32 with Yellow GT1 Interface
You need to set up proper parameters in remote.ini file too.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content