Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ford fusion 1.4tdci sid802 and visteon cluster, cranks but doesn't start???
03-12-2018, 17:00 PM,
(This post was last modified: 03-12-2018, 17:59 PM by oltianmunga.)
Post: #1
|
|||
|
|||
ford fusion 1.4tdci sid802 and visteon cluster, cranks but doesn't start???
hello guys, have this ford 2004 fusion with 1.4tdci engine that cranks but doesn't start with siemens SID802 ecu and visteon cluster, on diag it says that pcm processor is faulty, i have read ecu eeprom, ecu flash and cluster eeprom. anyone can have a look at my files maybe i have some files corrupted and any synchro needs to be done? thanks in advance.
(03-12-2018, 17:00 PM)oltianmunga Wrote: hello guys, have this ford 2004 fusion with 1.4tdci engine that cranks but doesn't start with siemens SID802 ecu and visteon cluster, on diag it says that pcm processor is faulty, i have read ecu eeprom, ecu flash and cluster eeprom. anyone can have a look at my files maybe i have some files corrupted and any synchro needs to be done? thanks in advance. Put all ecu eeprom, flash and cluster eeprom back and get a single code scanned by autel ms906bt which is Po6o6:60 and on service manual says that might be a faulty injector, accelerator pedal or crank shaft sensor or an faulty PCM itself. any idea??? |