Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ NBT EVO HW4.1 on the bench
15-12-2018, 18:07 PM,
Post: #11
RE: NBT EVO HW4.1 on the bench
OK so now the NBT stays up smile

It was just the resistance of 120ohm that was not connected (Thanks Via for the reminder), but my screen (8.8" Touch screen) remains black, the fan does not start and also the iDrive controller does not light !

I'm currently doing some tests with different messages ID but any guidance are welcome. Thanks.
15-12-2018, 18:13 PM,
Post: #12
RE: NBT EVO HW4.1 on the bench
ID 202 is light for controller (DIMMUNG (5000ms))

NBTEVO, ENAV2, MGU  - CP OFF, Navi , APPS , Carplay, AA
MGU ID-8-9-10 Cars - Full Region change

NCD Secure Coding 2.0




15-12-2018, 22:00 PM,
Post: #13
RE: NBT EVO HW4.1 on the bench
Fan won't start a long time in applicationMode.
202 FD FF play with it..
08-01-2019, 16:44 PM,
Post: #14
RE: NBT EVO HW4.1 on the bench
When starting up ZGW on the bench, will not it start with only the following signals?
12F  37 7C 8A DD D4 05 33 06
130  45 40 22 8F FE

Please tell me the necessary start-up signal.
I am troubled because ZGW does not start.
10-01-2019, 12:48 PM,
Post: #15
RE: NBT EVO HW4.1 on the bench
(13-12-2018, 22:07 PM)Vias Wrote:  Well guys, I send only this two massage:
12F 37 7C 8A DD D4 05 33 06
563 00 00 00 00 FF FF 00 63
Only EVO+Laptop+Ethernet Cable+CanSender+Supply Power 12v and it work good for Flash, Code and play with it!
I don't use ID 130 and ID 267 or any other.

What is interval you use, more 100 ms? Are you have resistor 120 om in your CAN sender?

We can flash the EVO with just ethernet cable/CAN sender/power? No ZGW? What software can be used to do this?
12-01-2019, 16:34 PM,
Post: #16
RE: NBT EVO HW4.1 on the bench
My problem was solved !

In fact, the HU has no CAFD in it, so because of that the screen remained black. So after injecting CAFD with Esys the screen turned on and now everything work like a charm.

Thank guys for your help. yes


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Tool for bench read 8hp Garryq 9 1,572 26-03-2024, 09:32 AM
Last Post: skywoker
  Bosch MEVD172H bench backup mrproper 1 249 23-03-2024, 18:43 PM
Last Post: Ratnik1990
XZBMW ENAV2 bench activation Airbus 10 801 25-02-2024, 08:17 AM
Last Post: jb2005
  Motronic 3.3.1 bench jaramillo 3 174 13-02-2024, 05:12 AM
Last Post: 2013m5
  Dde Coding/flash with esys in bench? ruben_17non 0 183 08-02-2024, 21:28 PM
Last Post: ruben_17non
  Entrynav2 - Trying to Trigger Component Protection on Bench 2002JCW 5 465 30-01-2024, 16:44 PM
Last Post: DEJMIEN
XZBMW NBT display on bench without unit djordan 4 324 15-01-2024, 08:08 AM
Last Post: Powerlab
XZBMW cas / cluster bench setup Cniksor 103 23,844 09-01-2024, 09:43 AM
Last Post: MIKUr1
  Entrynav2 bench Jalami 1 298 06-01-2024, 15:28 PM
Last Post: Airbus
XZBMW ID8 bench CID can not light bbw 3 467 12-12-2023, 20:36 PM
Last Post: Airbus

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content