Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
HU_NBT2 coding problem please Help
13-12-2018, 09:40 AM,
Post: #1
|
|||
|
|||
HU_NBT2 coding problem please Help
hello, I have a problem after coding HU_NBT2 (evo)
I can not code it now on the display I have the red no signal sign nbt is from this car I wanted to convert stations to europe when reading ecu in esys in nbt there is no CAFT this is my fault Can someone help me repair nbt? Thanks. Caf's suchen Tal wird generiert Abarbeitung wird gestartet TAL execution started. VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197] ExecutionID=2016/12/09-16:25:19.158 [] prepareTALExecution started [] prepareTALExecution finished [] prepareVehicleForCoding started [] prepareVehicleForCoding finished [HU_NBT2 - 63] prepareECUforCoding started [HU_NBT2 - 63] prepareECUforCoding finished [HU_NBT2 - 63] authenticateECUforCoding started [HU_NBT2 - 63] authenticateECUforCoding finished [HU_NBT2 - 63 - cafd_00001ef6-006_018_016] Transaction type: cdDeploy; Message: TA started MCDDiagService [HU_NBT2 - 63 - cafd_00001ef6-006_018_016] Transaction type: cdDeploy; Message: TA finished [HU_NBT2 - 63] There was an error during TAL execution, please check the log files. [HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error: code: service returned global negative response description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; ECU: HU_NBT2_63_ETHERNET severity: ERROR [HU_NBT2 - 63] finalizeECUCoding started [HU_NBT2 - 63] finalizeECUCoding finished [] There was an error, please check the log files. [] - [Exception - HU_NBT2 - 63] job failed with negative response error: code: service returned global negative response description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; ECU: HU_NBT2_63_ETHERNET severity: ERROR [] finalizeVehicleCoding started [] finalizeVehicleCoding finished [] finalizeTALExecution started [] finalizeTALExecution finished TAL execution finished TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "24s". [C206] Abarbeitung beendet |
|||
13-12-2018, 09:50 AM,
Post: #2
|
|||
|
|||
RE: HU_NBT2 coding problem please Help
Are you not able to inject a CAFD? Also try to code it the original FA. Also, if it doesn´t work, you need a FA patch
|
|||
13-12-2018, 09:53 AM,
Post: #3
|
|||
|
|||
RE: HU_NBT2 coding problem please Help
my nbt evo is from this car I have fa original but I can not encode I did not retrofit everything is original
|
|||
13-12-2018, 15:56 PM,
Post: #4
|
|||
|
|||
RE: HU_NBT2 coding problem please Help
I think you need someone to get you a retrofit FSC for USA to ECE region change for NBT Evo, can probably buy them for $50-100 from some members of the forum
same issue here: https://cartechnology.co.uk/showthread.php?tid=27263 |
|||
13-12-2018, 21:27 PM,
Post: #5
|
|||
|
|||
RE: HU_NBT2 coding problem please Help
Is there anyone able to make a modified fa. for me? I have to screw it out too, I do not know what to do anymore.
Thanks. |
|||
13-12-2018, 23:01 PM,
Post: #6
|
|||
|
|||
RE: HU_NBT2 coding problem please Help
I already saw with kind of error, I managed to correct this by changing some VO code in the FA.
For example : maybe try to remove 698 (Area-Code 2 for DVD), 6AA (BMW TeleServices)... |
|||
14-12-2018, 04:56 AM,
(This post was last modified: 16-12-2018, 07:07 AM by rana.)
Post: #7
|
|||
|
|||
RE: HU_NBT2 coding problem please Help
did you use tool32?
|
|||
14-12-2018, 09:48 AM,
Post: #8
|
|||
|
|||
RE: HU_NBT2 coding problem please Help
Thanks, I managed to encode NBT by creating coding with FA and svt
|
|||
14-12-2018, 10:36 AM,
Post: #9
|
|||
|
|||
RE: HU_NBT2 coding problem please Help
Can you detail a bit what exactly you did?
|
|||
14-12-2018, 12:07 PM,
Post: #10
|
|||
|
|||
RE: HU_NBT2 coding problem please Help
I'm also interested
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content