Possibly Related Threads…

***kubixix*** · 21-04-2019, 10:11 AM,

(08-02-2019, 06:24 AM)Almaretto Wrote:
(08-02-2019, 06:03 AM)BimmerSLO Wrote: One question..... is it possible to also use this remote access for diagnostics with ISTA?

Yes

Hello, can you tell how to?
I can successfully connect with Esys but got problems with ISTA.
Direct connection with ipp from remote hamachi?

***kubixix*** · 22-04-2019, 08:55 AM,

I solved it by using connection through ediabas.
The thing is that ENET diagnostic port is 6801 and control port is 6811. For example if I want to use DE file reader it says that ignition is off. I think it’s because lack of connection on port 6811. If someone has solution for that? Ista is working fine, it doesn’t need controlport from what i saw.

***kmodel99*** · 24-04-2019, 07:22 AM,

(13-12-2018, 11:48 AM)bmwcoder75 Wrote: There you go, I compiled this document for you guys.

This is my own method. Many other VPN clients available, or can be done via home router too.
Especially useful when remote client does not have E-Sys or you do not want the remote client to see how you do.

I was able to compile this doc and make my own procedure thanks to some posters who helped out by pointing me to the right direction.

Thanks and Rep please then PM for password

PM (Private Message) for password, do NOT post in thread for it, it will be removed.

Thanks, Admin.

Please cleanup your Private MEssages.

***bmwcoder75*** · 24-04-2019, 08:17 AM,

New document updated with additional info and no more password
Enjoy

***mashi1228*** · (This post was last modified: 25-07-2019, 05:03 AM by mashi1228.)

very thanks.
good work

***mashi1228*** · (This post was last modified: 25-07-2019, 05:03 AM by mashi1228.)

(22-04-2019, 08:55 AM)kubixix Wrote: I solved it by using connection through ediabas.
The thing is that ENET diagnostic port is 6801 and control port is 6811. For example if I want to use DE file reader it says that ignition is off. I think it’s because lack of connection on port 6811. If someone has solution for that? Ista is working fine, it doesn’t need controlport from what i saw.

thanks.

***emhtuning*** · 24-07-2019, 09:30 AM,

in order for ista+ to work remotely , easiest way is to your easyconnect to configure Ediabas as ENET and use the generated VPN IP address as Enet IP address . then change the interface settings in ISTA+ to "Ediabas.ini" , usually its first option in the list .

I use that everyday ( I use teamviewer VPN option since i have paid account ) , works perfectly fine .

***mashi1228*** · (This post was last modified: 25-07-2019, 05:02 AM by mashi1228.)

(24-07-2019, 09:30 AM)emhtuning Wrote: in order for ista+ to work remotely , easiest way is to your easyconnect to configure Ediabas as ENET and use the generated VPN IP address as Enet IP address . then change the interface settings in ISTA+ to "Ediabas.ini" , usually its first option in the list .

I use that everyday ( I use teamviewer VPN option since i have paid account ) , works perfectly fine .

oh thanks.

***mashi1228*** · 01-08-2019, 15:02 PM,

(24-07-2019, 09:30 AM)emhtuning Wrote: in order for ista+ to work remotely , easiest way is to your easyconnect to configure Ediabas as ENET and use the generated VPN IP address as Enet IP address . then change the interface settings in ISTA+ to "Ediabas.ini" , usually its first option in the list .

I use that everyday ( I use teamviewer VPN option since i have paid account ) , works perfectly fine .

I have a question. I try to firmware update kombi and nbt with vpn, so I fail due to dhcp problem. Is there any way? I'm using Team Viewer.
All other modules are being updated well.
thanks.

***bmwcoder75*** · 01-08-2019, 16:30 PM,

(01-08-2019, 15:02 PM)mashi1228 Wrote:
(24-07-2019, 09:30 AM)emhtuning Wrote: in order for ista+ to work remotely , easiest way is to your easyconnect to configure Ediabas as ENET and use the generated VPN IP address as Enet IP address . then change the interface settings in ISTA+ to "Ediabas.ini" , usually its first option in the list .

I use that everyday ( I use teamviewer VPN option since i have paid account ) , works perfectly fine .

I have a question. I try to firmware update kombi and nbt with vpn, so I fail due to dhcp problem. Is there any way? I'm using Team Viewer.
All other modules are being updated well.
thanks.

Copy the files locally and install esys. Do it this way

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	G01 2019 X3 - ATM Replacement/Coding Help Needed	jchisholm17	10	251	3 hours ago Last Post: jchisholm17
	TMS FRM3 F10 Coding issue	mj_mj_mj	17	1,887	16-04-2024, 09:30 AM Last Post: user_530d
	BMW F10 RHD to LHD coding?	morto	12	1,464	13-04-2024, 17:32 PM Last Post: pablito94
	E60 EVO OABR to OBD Coding	painsage	13	462	12-04-2024, 10:54 AM Last Post: painsage
	1 serie F40 coding help	nixte	1	144	08-04-2024, 17:16 PM Last Post: Fatalix
	BMW E60 Telephone coding for mr12volt	Jbpetkov	3	190	06-04-2024, 19:02 PM Last Post: Jbpetkov
	NBT Evo CAFD missing after coding error	Mugga	12	495	05-04-2024, 20:30 PM Last Post: Mugga
	BMW E60 coding problem	GarageX	8	346	02-04-2024, 10:07 AM Last Post: GarageX
	BMW F34 LHD to RHD heated seats retrofit coding	Schnitzer	4	195	29-03-2024, 20:44 PM Last Post: grizzle
	G15 remember last driving mode & ECO PRO MSA memory coding	duss46	7	478	26-03-2024, 18:56 PM Last Post: duss46

Contact Us