[eksbawks]

Hello, I am a newbie to the whole ECU moding scene, I am trying my best to learn this exciting world.

I have a 2008 Jeep Grand Cherokee 3.0L (Turbo Diesel OM642 engine) with EDC16CP31 Bosch ecu that is throwing me a code P0101

I have fully checked the MAF and all wiring. All the tests were within spec.



Is is possible to delete this DTC?



I am including the file. I would also appreciate any info as to what I should be reading, and what tools I should be using as in the future I realize I will have DPF issues etc.

HW:
SW: 1037392204
VIN nr.: 1J8HR48M98C522247
SW ver.:
Spare: CR4C-642-53W1-WK-BIN10_OP-160kW-V1_4x4_Dpf_EGS53
Engine:
HW Ver.:
SW upg.: 53139506
Installation:


Thank you very much

[eksbawks]

Please remove the DTC P0101

Thanks

[eksbawks]

So I downloaded a program called WinOLS.

I setup 16 bit more with low high and managed to find a line that had a block with 00048 and changed it to 65535 and left the block on the right as 00000.

Am on the right track here?

[ROD-BENDERS]

---

So I downloaded a program called WinOLS.

I setup 16 bit more with low high and managed to find a line that had a block with 00048 and changed it to 65535 and left the block on the right as 00000.

Am on the right track here?

here DTC P0101 x15 off

[eksbawks]

I uploaded it and that pesky code is gone!!!