Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. FemtoEVO



ERROR FLASHING CAS3 MODULE
15-12-2018, 23:38 PM,
Post: #1
ERROR FLASHING CAS3 MODULE
I’m currently unable to flash my CAS3 module. Would anyone be able to assist with this Winkfp error.


Attached Files Thumbnail(s)
       
Quote this message in a reply
16-12-2018, 00:35 AM, (This post was last modified: 16-12-2018, 00:36 AM by Silva1337.)
Post: #2
RE: ERROR FLASHING CAS3 MODULE
Hello you need take out cas read bdm and put dumps, and also put photo here to know which sw you need.
Quote this message in a reply
[+] 1 user says Thank You to Silva1337 for this post
16-12-2018, 00:36 AM,
Post: #3
RE: ERROR FLASHING CAS3 MODULE
Spdaten updated?
CAS needs to be flashed with ignition OFF key out
Quote this message in a reply
16-12-2018, 05:41 AM,
Post: #4
RE: ERROR FLASHING CAS3 MODULE
ignition off key out or flashing cant start
Quote this message in a reply
16-12-2018, 10:36 AM,
Post: #5
RE: ERROR FLASHING CAS3 MODULE
First of all read Your cas eeprom with bdm to prevent key and ISN data loss. Try to read and program cas flash with bdm . In CAS3 it is often damaged flash due to battery problems. If it so then get any other CAS ( with same MCU of course ) write Your eeprom and program it with Winkfp. Should work..
Quote this message in a reply
[+] 1 user says Thank You to Hoborg for this post
16-12-2018, 16:57 PM,
Post: #6
RE: ERROR FLASHING CAS3 MODULE
Post your dumps and current ZUSB number.
We fix and update for you.
Quote this message in a reply
[+] 1 user says Thank You to KEEEN for this post
16-12-2018, 17:02 PM,
Post: #7
RE: ERROR FLASHING CAS3 MODULE
Thanks Guys i appreciate the help I’ll post the dump once I get the required hardware to read the cas module.
Quote this message in a reply
16-12-2018, 18:09 PM,
Post: #8
RE: ERROR FLASHING CAS3 MODULE
SO,

you have tried to flash the CAS with turned off the iginition as it is written here?


Thorsten
Quote this message in a reply
16-12-2018, 21:32 PM,
Post: #9
RE: ERROR FLASHING CAS3 MODULE
remove the key then start flashing
Quote this message in a reply
17-12-2018, 03:36 AM,
Post: #10
RE: ERROR FLASHING CAS3 MODULE
(16-12-2018, 18:09 PM)Thorsten Wrote:  SO,

you have tried to flash the CAS with turned off the iginition as it is written here?


Thorsten


Yes I’m familiar with the procedure on how to flash the module. I suspect it was a bad K-can cable that the issue.
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Flashing NBT evo problem - recognize id4 vs id5 rickynguyen 5 185 43 minutes ago
Last Post: hoanganhtai
XRoles Rolls Royce ICOM Error Help pls e46ad 1 86 9 hours ago
Last Post: BMWzone
  Nbt Evo Dead After Flashing graphys 17 1,146 Yesterday, 19:42 PM
Last Post: bmwcoder75
  E-sys flashing nbt http server error Fx82 13 550 Yesterday, 19:32 PM
Last Post: retrobmwtr
XZBMW BMW E90 CIC Flashing error Czozen 1 86 Yesterday, 17:03 PM
Last Post: duckdonald
XZBMW BMW F10 - initializing used TMS module in HEADLIGHT number7 28 12,637 Yesterday, 12:50 PM
Last Post: maxiart
XZBMW F20 KOMBI2 module - how to coding? chossecr 6 1,253 24-03-2019, 14:47 PM
Last Post: jesusvaron
XZBMW SOS Error after Combox retrofit ftr01 12 446 23-03-2019, 10:37 AM
Last Post: wursti
XSMini Mini F56 strange FLEL error duss46 0 72 20-03-2019, 19:51 PM
Last Post: duss46
XZBMW Very slow EVO flashing gvitkis 18 2,573 20-03-2019, 18:55 PM
Last Post: sahiljain22

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content