Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ERROR FLASHING CAS3 MODULE
15-12-2018, 23:38 PM,
Post: #1
ERROR FLASHING CAS3 MODULE
I’m currently unable to flash my CAS3 module. Would anyone be able to assist with this Winkfp error.


Attached Files Thumbnail(s)
       
Quote this message in a reply
16-12-2018, 00:35 AM, (This post was last modified: 16-12-2018, 00:36 AM by Silva1337.)
Post: #2
RE: ERROR FLASHING CAS3 MODULE
Hello you need take out cas read bdm and put dumps, and also put photo here to know which sw you need.
Quote this message in a reply
[+] 1 user says Thank You to Silva1337 for this post
16-12-2018, 00:36 AM,
Post: #3
RE: ERROR FLASHING CAS3 MODULE
Spdaten updated?
CAS needs to be flashed with ignition OFF key out
Quote this message in a reply
16-12-2018, 05:41 AM,
Post: #4
RE: ERROR FLASHING CAS3 MODULE
ignition off key out or flashing cant start
Quote this message in a reply
16-12-2018, 10:36 AM,
Post: #5
RE: ERROR FLASHING CAS3 MODULE
First of all read Your cas eeprom with bdm to prevent key and ISN data loss. Try to read and program cas flash with bdm . In CAS3 it is often damaged flash due to battery problems. If it so then get any other CAS ( with same MCU of course ) write Your eeprom and program it with Winkfp. Should work..
Quote this message in a reply
[+] 1 user says Thank You to Hoborg for this post
16-12-2018, 16:57 PM,
Post: #6
RE: ERROR FLASHING CAS3 MODULE
Post your dumps and current ZUSB number.
We fix and update for you.
Quote this message in a reply
[+] 1 user says Thank You to KEEEN for this post
16-12-2018, 17:02 PM,
Post: #7
RE: ERROR FLASHING CAS3 MODULE
Thanks Guys i appreciate the help I’ll post the dump once I get the required hardware to read the cas module.
Quote this message in a reply
16-12-2018, 18:09 PM,
Post: #8
RE: ERROR FLASHING CAS3 MODULE
SO,

you have tried to flash the CAS with turned off the iginition as it is written here?


Thorsten
Quote this message in a reply
16-12-2018, 21:32 PM,
Post: #9
RE: ERROR FLASHING CAS3 MODULE
remove the key then start flashing
Quote this message in a reply
17-12-2018, 03:36 AM,
Post: #10
RE: ERROR FLASHING CAS3 MODULE
(16-12-2018, 18:09 PM)Thorsten Wrote:  SO,

you have tried to flash the CAS with turned off the iginition as it is written here?


Thorsten


Yes I’m familiar with the procedure on how to flash the module. I suspect it was a bad K-can cable that the issue.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW E83 A1 error - MRS: No message from DSC ... ivanp 22 926 27-03-2024, 22:09 PM
Last Post: ivanp
  F15 6WB Retrofit VIN Error moreply 4 183 25-03-2024, 07:24 AM
Last Post: RuleNormaliai
  Flashing a stock box map to an E60 with XHP? GoNz0- 10 304 20-03-2024, 09:33 AM
Last Post: tomaxsas
XZBMW F15 Programming Error mcrussell 7 389 20-03-2024, 05:38 AM
Last Post: SweetBMW
  NBT EVO HW4.1 CheckMemory Error moreply 10 470 19-03-2024, 19:43 PM
Last Post: moreply
XZBMW xdrive off with esys without error in dash dankocg 11 2,279 14-03-2024, 13:41 PM
Last Post: Adekborys69
XZBMW G31 LCI Tail Lights retrofit coding error tste1982 27 1,825 10-03-2024, 21:29 PM
Last Post: vanos
  Esys I-Step error adamnewport 10 420 08-03-2024, 09:07 AM
Last Post: Hoborg
XZBMW psdz error furnpick 4 131 05-03-2024, 15:20 PM
Last Post: furnpick
XZBMW ISTA D - identification possible, unable to get status of each module thedafeet 6 243 04-03-2024, 15:25 PM
Last Post: thedafeet

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content