Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

E46 2002 + icom + no communication
16-12-2018, 13:59 PM, (This post was last modified: 16-12-2018, 14:02 PM by Clusters.)
Post: #1
E46 2002 + icom + no communication
Hi, 

I try to connect to E46 2002 year with icom.

In ista i get:
"The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis-diagnosis has been activated"

In Inpa IFH-0010 error on every module.

It's icom so no need manipulate pin 7 and 8. Mayby ediabas? I have installed only patched - 7.3.
I shoud try with 2.12?

If I helped, please magic buttons thx+rep yes yes yes under under under
Quote this message in a reply
16-12-2018, 14:17 PM, (This post was last modified: 16-12-2018, 14:27 PM by Twoone.)
Post: #2
RE: E46 2002 + icom + no communication
(16-12-2018, 13:59 PM)lustek Wrote:  Hi, 

I try to connect to E46 2002 year with icom.

In ista i get:
"The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis-diagnosis has been activated"

In Inpa IFH-0010 error on every module.

It's icom so no need manipulate pin 7 and 8. Mayby ediabas? I have installed only patched - 7.3.
I shoud try with 2.12?
No need to do something with PIN 7 and PIN 8

On Inpa with ICOM are the dots for KL30 and KL15 black?

Could be problem of the ICOM not detect KL15. Check also power on pin 16 on OBD of the car, and when ignition is ON also pin 1)

If you use ISTA you select  ICOM/ENET in VCI, ediabas patched is not used.(Directly from ISTA to LAN adapter)

Are u using ITOOL radar or Easyconnect to reserve ICOM when working with INPA?

Does ICOM shows up in connection manager of ISTA ?
Quote this message in a reply
16-12-2018, 15:00 PM,
Post: #3
RE: E46 2002 + icom + no communication
Hi,
Yes everything is OK. I use that icom many times.
In ISTA kl15 and kl30 voltage is showing OK so pin 16 and 1 OK.
In Inpa 2 black dots. I try to reserve icom in itoolradar and easyconnect.

I install ediabas from standard tool 2.12, configure it by bmw coding tool but no communication.

What voltage should be on pin 8 and 4/5?

If I helped, please magic buttons thx+rep yes yes yes under under under
Quote this message in a reply
16-12-2018, 15:07 PM,
Post: #4
RE: E46 2002 + icom + no communication
45 is the GND 8 is the K-line with about ~12V!
Quote this message in a reply
16-12-2018, 15:11 PM,
Post: #5
RE: E46 2002 + icom + no communication
(16-12-2018, 15:00 PM)lustek Wrote:  Hi,
Yes everything is OK. I use that icom many times.
In ISTA kl15 and kl30 voltage is showing OK so pin 16 and 1 OK.
In Inpa 2 black dots. I try to reserve icom in itoolradar and easyconnect.

I install ediabas from standard tool 2.12, configure it by bmw coding tool but no communication.

What voltage should be on pin 8 and 4/5?
Pins 4/5 are ground 

Pin 8 is K-Line signal and you cannot measure with DVOM because DVOM measures RMS voltage.
            You have to use Occiloscoop.
Quote this message in a reply
16-12-2018, 15:25 PM,
Post: #6
RE: E46 2002 + icom + no communication
4/5 is ground i know.
So I can't put multimeter one leg in 4/5 pin and second in 8 and meansure voltage or resistance?I dont have osciloscop.

If I helped, please magic buttons thx+rep yes yes yes under under under
Quote this message in a reply
16-12-2018, 16:11 PM, (This post was last modified: 16-12-2018, 16:33 PM by Twoone.)
Post: #7
RE: E46 2002 + icom + no communication
(16-12-2018, 15:25 PM)lustek Wrote:  4/5 is ground i know.
So I can't put multimeter one leg in 4/5 pin and second in 8 and meansure voltage or resistance?I dont have osciloscop.

You can measure a voltage on the k-line and signal gnd on pin 5 that way but it dus not say anything about the quality of the data signal.

Normaly K-line idles high, with a 510 ohm resistor to Vbatt
Quote this message in a reply
16-12-2018, 16:37 PM,
Post: #8
RE: E46 2002 + icom + no communication
(16-12-2018, 13:59 PM)lustek Wrote:  Hi, 

I try to connect to E46 2002 year with icom.

In ista i get:
"The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis-diagnosis has been activated"

In Inpa IFH-0010 error on every module.

It's icom so no need manipulate pin 7 and 8. Mayby ediabas? I have installed only patched - 7.3.
I shoud try with 2.12?

check if the IP address in Ediabas .ini is the same as the one you see in iTool Radar.
Quote this message in a reply
16-12-2018, 17:18 PM, (This post was last modified: 16-12-2018, 17:22 PM by lustek.)
Post: #9
RE: E46 2002 + icom + no communication
I configure ediabas to work as remote. Ip address is in remote.ini. i check them and is OK.

What I can do else? Tomorrow i will check fuses. If any module is faulty, they can block k-line and diagnostic?

If I helped, please magic buttons thx+rep yes yes yes under under under
Quote this message in a reply
16-12-2018, 17:25 PM,
Post: #10
RE: E46 2002 + icom + no communication
Is there anything retrofitted to the car that could interrupt the Kbus? You could try any disconnecting one pin at a time for the kbus connection under the right side of the dashboard behind the glovebox to outrule any interruptions there.

- Remote coding & programming - F 8HP45/50/70/75 ISN reset remote
- Remote ECU tuning MEVD17 + EDC17 + MGD1 ECUS + 8HP EGS BMW/MINI
- M2/M3/M4 CS OR GTS Flash -
 8HP 
Alpina EGS flash F & G remote
- EVO ID4 to ID6 flash - Apple Carplay activation

Skype: live:fatalix - Whatsapp: PM for details
Quote this message in a reply
[+] 1 user says Thank You to Fatalix for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,714 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW Poor wifi signal from new ICOM's bmchicago 1 127 26-03-2024, 03:04 AM
Last Post: rocdeng
XZBMW BMW F10 no FlexRay communication at all. poki123 5 332 25-03-2024, 00:56 AM
Last Post: armenh7
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,884 24-03-2024, 11:29 AM
Last Post: Twointje
  TESTO tool with ICOM Rolzs 5 312 17-03-2024, 20:23 PM
Last Post: Vojno
XZBMW BMW F01 Bluetooth Communication Issues NAVJunk 10 298 08-03-2024, 06:30 AM
Last Post: NAVJunk
  Request xHP 6HP decrypted files and icom flasher tste1982 10 820 05-03-2024, 22:47 PM
Last Post: bradsm87
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 203 41,888 16-02-2024, 19:32 PM
Last Post: Vojno
XZBMW BMW_ISPI_ICOM-FW_03-23-22 & ICOM-Next-FW_04-23-22 shawnsheridan 22 2,363 05-02-2024, 23:47 PM
Last Post: vagrom
  Connect to MGU via SSH and ICOM anton.maier 1 322 02-02-2024, 04:46 AM
Last Post: VroomVroom

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content