[Anas-alkhatib]

I had problem with ecu while ago and need to order one of this adapter to reprogramming the ecu fit with software to marry immo to my keys, so what this best model of thi is good values for personal use on accord 2003 2,4L petrol 
1-HDS j2534 cable around 19$
2-honda HDS tool full set 87$
3-KESS V2.4 full set 95$

To programming the used replaced ecu to my key transponder on accord 2003 2.4L petrol I'd 46 transponder
*The adapters pic is attached

---

There guys tried to make it by SBB KEY PROGRAMMER with blank transponders but it's not successful 

[macomatic]

Same issue for me. I got the sbb pro2 but it didn't work for my Honda Accord 2003, thinking of going with Honda hds with him or obdstar x100

[Damex37]

Best thing to use for honda immo is Launch X431. The one that can do it that's the cheapest is $300 USD. You can use the Honda HDS, but you need passwords to adapt keys to car. If you are replacing the PCM with a used PCM, then a Launch would be super easy. I have never programmed immo using clone Honda HIM. They should work though. Good Luck! I personally use Launch for Honda's. Super easy.

[drovid]

Best thing to use for honda immo is Launch X431. The one that can do it that's the cheapest is $300 USD. You can use the Honda HDS, but you need passwords to adapt keys to car. If you are replacing the PCM with a used PCM, then a Launch would be super easy. I have never programmed immo using clone Honda HIM. They should work though. Good Luck! I personally use Launch for Honda's. Super easy.

I tried use Launch to code new key at Civic FN2 all keys lost and didn't work.
Also I tried Launch to code a second key to Accord 2007 and didn't work as well.

[r.kelly]

Best thing to use for honda immo is Launch X431. The one that can do it that's the cheapest is $300 USD. You can use the Honda HDS, but you need passwords to adapt keys to car. If you are replacing the PCM with a used PCM, then a Launch would be super easy. I have never programmed immo using clone Honda HIM. They should work though. Good Luck! I personally use Launch for Honda's. Super easy.

I tried use Launch to code new key at Civic FN2 all keys lost and didn't work.
Also I tried Launch to code a second key to Accord 2007 and didn't work as well.

Were you eventually able to fix it? If yes, with what tool and version of software?

[r.kelly]

I upgraded my Mini-VCI firmware from 1.4.1 to 2.0.1. it's not longer working. It only shows green light. I downgraded it back still the same. In a nutshell, I need a scanner that can perform full service functions for Toyota techstream and Honda HDS.

A friend suggested:

1. Fly100 G2 for Honda HDS

2. Tactic open-port 2 for Toyota techstream

The two China HIMs I bought can't do immo function and it required passcode moreover it not USB compatible.

My questions is: is the two listed above good for Honda HDS and Toyota techstream?

Thanks