Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
"Protocol Not Found" Kess on any Model
|
18-12-2018, 16:34 PM,
Post: #1
|
|||
|
|||
|
"Protocol Not Found" Kess on any Model
Hi fellas,
Was about to begin on a Bmw E93 to tun but Kess gives me "Protocol Not Found" So I tried it on 2.33, the same message... Tried to choose another Car/Model.. Again the same... Any help or knowledge... Just one thing, yesterday opened the tool only to take picture and that's all, nothing touched on PCB or anything.. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
18-12-2018, 17:04 PM,
Post: #2
|
|||
|
|||
|
RE: "Protocol Not Found" Kess on any Model
Maybe you need to update protocols. /update folder in your ksuite...if you dont have any protocol, i think you need update folder in ksuite.
File service avaible -- EDC15 -- EDC16 -- EDC17
TFSI POPCORN -- RETARD IGNITION -- CRANKLE MAP LAUNCH CONTROL - MED7.X ANTILAG - MED7.X -- MED9.X NOLIFTSHIFT - MED7.X PM FOR MORE.... |
|||
|
|
|
18-12-2018, 17:10 PM,
Post: #3
|
|||
|
|||
|
RE: "Protocol Not Found" Kess on any Model
try install ksuite for testing on other PC and use full quality USB cable.
|
|||
|
|
|
18-12-2018, 17:30 PM,
(This post was last modified: 18-12-2018, 19:10 PM by TilQ34.)
Post: #4
|
|||
|
|||
RE: "Protocol Not Found" Kess on any Model
(18-12-2018, 17:10 PM)retroid Wrote: try install ksuite for testing on other PC and use full quality USB cable. I wanted to try it but I have also a Green pcb Kess china, test it with both Ksuites I have and it works  (18-12-2018, 17:04 PM)esm1r Wrote: Maybe you need to update protocols. /update folder in your ksuite...if you dont have any protocol, i think you need update folder in ksuite. Update folder on Ksuite is empty, but I tested now witch my green pcb china clone, and it works good no error :s |
|||
|
|
|
18-12-2018, 19:09 PM,
Post: #5
|
|||
|
|||
|
RE: "Protocol Not Found" Kess on any Model
And if I switch them the SD cards from green to red pcb, would it do the temporarly help? same sw 5.017?
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
