Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Does Vediamo work with Vas5054?
24-12-2018, 08:24 AM,
Post: #1
|
|||
|
|||
Does Vediamo work with Vas5054?
Hello,
I hava a Question: Does Vediamo for Mercedes work with Pass True Vas5054? I Think it would not work but maybe it would work. If it would not work what must I buy for it? Thanks. |
|||
24-12-2018, 08:48 AM,
Post: #2
|
|||
|
|||
RE: Does Vediamo work with Vas5054?
No it will not work VAS5054 is not Daimler hardware. You need Daimler hardware.
|
|||
Reputation: -1 - nobbynobbs [-1] | |||
24-12-2018, 12:25 PM,
Post: #3
|
|||
|
|||
RE: Does Vediamo work with Vas5054?
Yes but xentry works also with vas5054 with Pass True. Did it work with Pass True or also not?
|
|||
24-12-2018, 14:11 PM,
(This post was last modified: 24-12-2018, 14:20 PM by pesona.)
Post: #4
|
|||
|
|||
RE: Does Vediamo work with Vas5054?
|
|||
Reputation: +3 - Marcos [+1] , kadoemon [+1] , ACloneHasNoName [+1] | |||
26-12-2018, 10:34 AM,
Post: #5
|
|||
|
|||
RE: Does Vediamo work with Vas5054?
I have tried Vediamo 5 and i think there are no settings for passthrue. I would try Vediamo 4.
So I have tried Vediamo 4 but I did not understand your suggestion. Where can I try CAN ecu? |
|||
26-12-2018, 13:01 PM,
(This post was last modified: 29-12-2018, 00:51 AM by pesona.)
Post: #6
|
|||
|
|||
RE: Does Vediamo work with Vas5054?
please forget about my comment on can ecu. for experimental and educational purpose, i am wrong if i limit your learning. please just try to test it for yourself all ecu that you want to test and don't forget to share. i want to learn too.
good luck |
|||
Reputation: +1 - jaramillo [+1] | |||
28-12-2018, 16:40 PM,
Post: #7
|
|||
|
|||
RE: Does Vediamo work with Vas5054?
It is build for CAESAR, DCDI hardware. There is in manual is possible use J2534 pass-thru interface but together as I remember with caesar hardware part A. I tried before some time use VAS5054 with DTS Monaco. VAS5054 was accepted by Monaco without problem but was not accepted by Daimler part of Monaco. Monaco just said there is no DCDI hardware.
|
|||
Reputation: +1 - pesona [+1] | |||
03-01-2019, 15:02 PM,
Post: #8
|
|||
|
|||
RE: Does Vediamo work with Vas5054?
With the help of pesona i tried vas5054 and chipsoft lite with vediamo, change coding for experiment in sam f and ic (smart 451, GLK) and all works perfect.
Thank you pesona for your job! |
|||
Reputation: +1 - pesona [+1] | |||
21-01-2019, 15:13 PM,
(This post was last modified: 21-01-2019, 15:16 PM by kadoemon.)
Post: #9
|
|||
|
|||
RE: Does Vediamo work with Vas5054?
hello!
I reference this topic and try to my vehicle(W212 with NTG5s1) - Vediamo detect my VAS5054 ->OK - Connect ECU -> OK - Read ECU identify ->OK Now working is good. Thanks Very useful information!! So,I have question. 1.VAS5054 have security level standard3 ,actual 3 , CAESAR-HW1. I install security level patch.After change security level standard3 ,actual 3 , CAESAR-HW9. Is this correct? before after 2.I want to change coding about DRL turned on (My car is Japan spec. I want to light up front light only) Where should I change? Has anyone done it with VAS5054? 3.I want to change coding about auto start/stop last mode. I know change MED40 coding. Has anyone done it with VAS5054? Is there anything to notice when changing coding? Please answer someone... Regard |
|||
Reputation: +1 - pesona [+1] | |||
08-02-2019, 19:33 PM,
Post: #10
|
|||
|
|||
RE: Does Vediamo work with Vas5054?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content