Possibly Related Threads…

***fab*** · 08-02-2019, 20:14 PM,

i guess 04.02.02 (look at the pic)

***MilenaG*** · 09-02-2019, 06:42 AM,

@zeze, used 4.02.02

***kashalot*** · (This post was last modified: 14-02-2019, 11:16 AM by kashalot.)

[align=left]

(21-01-2019, 15:13 PM)kadoemon Wrote: hello!

I reference this topic and try to my vehicle(W212 with NTG5s1)

- Vediamo detect my VAS5054 ->OK
- Connect ECU -> OK
- Read ECU identify ->OK

Now working is good.
Thanks Very useful information!!

So,I have question.

1.VAS5054 have security level standard3 ,actual 3 , CAESAR-HW1.
    I install security level patch.After change security level standard3 ,actual 3 , CAESAR-HW9.
    Is this correct?

      before


      after


2.I want to change coding about DRL turned on (My car is Japan spec. I want to light up front light only)
     Where should I change?　Has anyone done it with VAS5054?

3.I want to change coding about auto start/stop last mode.
     I know change MED40 coding.　Has anyone done it with VAS5054?
     Is there anything to notice when changing coding?

Please answer someone...
Regard

I can not say if it works with VAS. In any case, you can edit MED40 well with Vediamo. Deactivate start stop or set last mode. First of all, you need access permission.
Sorry for my english.

***ross2018*** · 16-03-2019, 19:42 PM,

Tried 4.02.2 with vas 5054 and all ok.
I will try with 05.05.5 and see if is working

***kmbeatz*** · 18-03-2019, 13:21 PM,

Hello. Can somebody explain what Vas5054 is?

And if i understand it right is it a replacement for the C4 or C5

Thank a lot.

***rs@chip*** · 09-05-2019, 23:54 PM,

(16-03-2019, 19:42 PM)ross2018 Wrote: Tried 4.02.2 with vas 5054 and all ok.
I will try with 05.05.5 and see if is working

any luck doing it? where you find passthru setings in vediamo 5.x ? thinking

***laco210*** · 10-05-2019, 22:00 PM,

VAS5054 is "old" Volkswagen diagnostic hardware. VAS5054 is not replacement for any Mercedes-Benz diagnostic hardware.

23-10-2019, 07:52 AM,

Hi,
I want to use my MDI2 as PASSTHRU for Vediamo 04.02.02, maybe somebody know how correctly edit row for Part J in slave.ini ?

***Joe2*** · 28-10-2019, 22:29 PM,

I think, MDI 2 name should be same as in passthru registry name :

DeviceName="Bosch - MDI 2"

Not tested but it should work.

***BigNode*** · 29-03-2022, 19:06 PM,

(08-02-2019, 19:33 PM)zeze Wrote:
(03-01-2019, 15:02 PM)MilenaG Wrote: With the help of pesona i tried vas5054 and chipsoft lite with vediamo, change coding for experiment in sam f and ic (smart 451, GLK) and all works perfect.
Thank you pesona for your job!

hi

what version of vediamo did you use

regards

usually 4.02.02, not v5

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Vediamo 5 config VXDIAG MTS 6532	blerim shehi	2	137	09-04-2024, 16:22 PM Last Post: blerim shehi
	Vediamo v05.00.05 + Activations	Faisc@	913	274,816	06-04-2024, 07:15 AM Last Post: ⭐⭐LORD⭐⭐
	Vediamo v05.01.01 FREE Activations for Car technology Members!	eyldar	1,195	131,052	05-04-2024, 10:53 AM Last Post: ⭐⭐LORD⭐⭐
	Crafter EZS coding with vediamo	Untant	1	165	01-03-2024, 18:46 PM Last Post: Viper1989
	Vediamo 05.00.05/05.01.01 Program and Keygen	Mcloud	14	6,029	21-02-2024, 10:32 AM Last Post: radoin
	Vediamo 5 - win7 64bit - connection problem	labik	1	133	19-02-2024, 11:21 AM Last Post: gcs190
	ECOM by Actia Configuration Help for Xentry & Vediamo	nagaraj.veeraiya	1	205	19-01-2024, 03:51 AM Last Post: siwecki
	Xentry Passthru 22.12.03, DTS Monaco, Vediamo, WIS, EPC+Openport 2.0 (Windows 11Pro)	motorotor	7	3,756	14-01-2024, 20:04 PM Last Post: mesobaste
	Vediamo coding fileset	tintoverano	3	459	02-01-2024, 11:04 AM Last Post: gcs190
	Vediamo 4.2.2 - keygen - invalid hardware	haxigi	5	473	08-11-2023, 21:43 PM Last Post: haxigi

Contact Us