[jenny123]

Work with clones

No PASS

Don't forget Thanks and Reputation Button

[garage_neo]

Even old clones?

[jenny123]

Yes, my clone is from 2008.
Of course it update FW to ver. 1.45 but works like a charm!

[BULL]

Hello, thanks for sw.
does it works with 64bit os???????

i have a win7 64bit os and it gives me an error message about administrative task

i tried to run as admin but nothing, please advise

as for the 32bit os is working well, but i cannot make it work.

i have a new clone with 1.45 fw but when i go to settings and try to test interface it says it cannot find the adapter or install usb drivers.

also it asks for activation, could you please write down the steps we have to follow to make it work,

the adapter is set on. please advise, many thanks

[rhinestonecowboy]

Download an extract with winrar move the folder to your C: drive now open folder select opcom .exe right click select properties
select compatiblity you can select xp sp3 an run as admin select apply this should work

For driver it should install as USB serial converter
to check connect device then go to computer management > Device manager check if it installed correctly

here's .ept file use mprog3.5

[vaidisvaidis]

Hi Lads ,when i go to diagnostic section wants to activate,how activate,plese help me ,thanks

[mattydr67]

I never heared about this even I have all the softwares versions ( op-com and vaux-com ) form 2010 made by this guy ( who is one of my best friends - or maybe the only one - and for sure it is not drdre20013 ) and the softwares no need any activation
Share some pics to see what are you talking about.
Good luck

P.S. - the new opcom tools that come v1.45 and it is marked opcom v6 use a new chinese MCU not a real one
So DO NOT UPGRADE or DOWNGRADE IT - it will block it and you cannot reflash it or use the tool anymore
Only tools marked opcom v5 are good or the one with yellow PCB ( one GAL and 5 relayes )

[jenny123]

No need to activate
My opcom is old - 2008, new ones are crap.
I'm XP user, don't know if works with win7 64bit.

If doesn't work try to re-install driver from VAUX-COM directory.

[vaidisvaidis]

Hi,all good,instaled on another laptop,works 100%,thanks

[i.p.m.ua]

Hi everyone. I have been running the program. adapter switched to version 1.45 but the program does not start. now I can not flash back to 1.39