[TsiliR53]

Hey all, anyone else using Vxdiag NANO with 112? I try to connect to a car and the screen goes blue and stays there for ages... Help?

[gaoan000]

Hey all, anyone else using Vxdiag NANO with 112? I try to connect to a car and the screen goes blue and stays there for ages... Help?

you need start software with the patch everytime

[bobdinro]

the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.

[wakawaka]

the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.

windows 10/7/xp ? 
64 bit or 32 bit ?

[gaoan000]

the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.

i dont known what you mean, can you pm a picture to me?

---

the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.

windows 10/7/xp ? 
64 bit or 32 bit ?

i tested win7 & win10

[quest]

Hey all, anyone else using Vxdiag NANO with 112? I try to connect to a car and the screen goes blue and stays there for ages... Help?

I have this problem too on win 7.64
did anyone solve the problem?

[wakawaka]

those facing issue, whats your VCX device firmware version ?

# VCX Firmware Update History


==============================================================
## 2019.02.21 v1.5.0.0
------------------------------------------
* Upd VCXBoot v1.5.0.0 multiple app boot and update.
* Fix J1939 flow control process when broadcast mixed with normal message(CUMMINS-QSC8.3).
* Imp USB connection status and other etc.
------------------------------------------
* 更新 VCXBoot v1.5.0.0 多分区引导和固件更新.
* 修正 J1939 多帧消息与广播消息混合时的流控制处理(CUMMINS-QSC8.3).
* 优化 USB 连接状态和其他.


==============================================================
## 2018.12.27 v1.4.11.0
------------------------------------------
* Fix J1939 Filter PGN=00EF00 with connection management(CAT-320D2)
* Fix J1939 broadcast filter and broadcast mixed with normal message(CUMMINS-QSM11).
* Imp Host and device communiction performance (Fix communication CS error sometimes).
------------------------------------------
* 修正 J1939 过滤器 PGN=00EF00 增加连接管理(CAT-320D2).
* 修正 J1939 广播消息过滤, 广播消息与普通多帧消息混合(CUMMINS-QSM11).
* 优化 主机和设备之间通信效率(修复通信校验CS可能出错).


==============================================================
## 2018.11.30 v1.4.10.0
------------------------------------------
* Fix ISO15765 flow control frame send error.
* Fix CAN2 driver control process.
* Add V83 new hardware bus switch(Read OBD Pin Voltage).
* Fix J1708 pin initiation.
------------------------------------------
* 修正 ISO15765 流控制帧发送错误.
* 修正 CAN2 驱动器控制信号逻辑顺序.
* 新增 V83 新版本硬件总线开关切换(读OBD引脚电压).
* 修正 J1708 引脚初始化.


==============================================================
## 2018.05.10 v1.4.4.0
------------------------------------------
* Fix BENZ C6 CAN Bus KL15 signal filter
* Fix BENZ C6 MBISO 5BPS initialization
------------------------------------------
* 修正 支持 BENZ C6 CAN 总线点火信号过滤
* 修正 支持 BENZ C6 MBISO 协议 5BPS 初始化


==============================================================
## 2017.12.04 v1.4.2.0
------------------------------------------
* Fix HS-CAN error when multiple channel working (JLR).
------------------------------------------
* 修正 CAN 多通道工作时 HS-CAN 可能通信错误 (路虎第一路CAN不能测以及止动装置错误).


==============================================================
## 2017.11.07 v1.4.1.0
------------------------------------------
* Fix J1939 protocol error for CUMMINS CM850.
------------------------------------------
* 修正 J1939 协议测试 CUMMINS CM850 连接错误.


==============================================================
## 2017.09.17 v1.4.0.0
* Add Expasion DoIP device information sync with VCX.
------------------------------------------
* 增加 扩展设备DOIP 与 VCX 同步扩展信息.


==============================================================
## 2017.09.05 v1.3.6.0
* Optimize CAN PS switch logic.
* Optimize TP20 protocol for J2534.
* Fix KW1281 reset to IDLE when tx error.
------------------------------------------
* 优化 NANO 系列 CAN PS 引脚选择逻辑.
* 优化 TP20 协议符合 J2534标准.
* 修正 KW1281 发送错误时恢复空闲状态.


==============================================================
## 2017.08.26 v1.3.5.0
* Fix v1.3.4.0 error for CAN OBD12/13.
------------------------------------------
* 修正 v1.3.4.0 固件引起的 CAN OBD12/13 错误.


==============================================================
## 2017.08.23 v1.3.4.0
* Fix CAN lost data in callback when multi channel scanning(PORSCHE).
* Fix CAN block filter do not set to hardware.
* Add J1850 VPW and PWM switch(PB3).
------------------------------------------
* 修正 CAN 回掉处理丢失数据, 当多通道扫描时(PORSCHE).
* 修正 CAN 阻止过滤器不需要配置到硬件.
* 增加 J1850 VPM 和 PWM 切换开关(PB3).


==============================================================
## 2017.07.04 v1.3.3.0
* Fix CAN frame queue crash when receive large amount data(BENZ).
* Optimize CAN rx handler and FIFO.
* Optimize CAN reinit.
* Optimize CAN filter overflow.
------------------------------------------
* 修正 CAN 接收海量数据时缓冲队列溢出设备死机(BENZ).
* 优化 CAN 接收中断和FIFO.
* 优化 CAN 重新初始化.
* 优化 CAN 过滤器溢出处理.


==============================================================
## 2017.06.07 v1.3.1.0
1. Fix SWCAN error for GM GDS2.
2. Fix CAN filter clear.


==============================================================
## 2017.05.22 v1.3.0.0
1. Modify CAN hardware filter for multiple channel(for BENZ).


==============================================================
## 2017.05.19 v1.2.3.11
1. Fix OBD pin voltage read for new VCX-PRO device.


==============================================================
## 2017.04.18 v1.2.3.10
1. Fix ISO15765 standard extend addr error.
2. Fix CAN baud 800k error.

[bobdinro]

the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.

i dont known what you mean, can you pm a picture to me?

---

the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.

windows 10/7/xp ? 
64 bit or 32 bit ?

i tested win7 & win10

Have you test the service functions? Programing function? For me is not working whole windows stop responding when starting functions and i have to reset computer.

Windows7 32bit

[gaoan000]

the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.

i dont known what you mean, can you pm a picture to me?

---

the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.

windows 10/7/xp ? 
64 bit or 32 bit ?

i tested win7 & win10

Have you test the service functions? Programing function? For me is not working whole windows stop responding when starting functions and i have to reset computer.

Windows7 32bit

i dont known what you mean, you can send me a pic or something

[mmartinezg]

Actually I bought the VCMII clone with software 113v ford and 112 mazda.

the ford software all good, but the mazda software asks me for a license, since I occupy the patch.

Does anyone have a solution for the mazda 112v with VCM2?