Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ccc bench wake up
29-12-2018, 23:51 PM,
Post: #1
|
|||
|
|||
ccc bench wake up
I have ccc+cid+con and usb>can interface.
What exactly it has to receive to wake up and to stay active all these units? Only 0x130 with 100ms or some others as well? |
|||
30-12-2018, 11:43 AM,
Post: #2
|
|||
|
|||
RE: ccc bench wake up
Question - to get cid working, do i need some other modules?
Because when units are starting i see backlight of CID turns on for 1sec and goes off. |
|||
05-01-2019, 19:34 PM,
Post: #3
|
|||
|
|||
RE: ccc bench wake up
|
|||
11-01-2019, 17:52 PM,
Post: #4
|
|||
|
|||
RE: ccc bench wake up
You can try this :
id = 0x12F, len = 8, data = 8C 50 8A DD F4 5 30 6 each 100MS |
|||
12-01-2019, 17:31 PM,
Post: #5
|
|||
|
|||
RE: ccc bench wake up
|
|||
15-01-2019, 16:21 PM,
Post: #6
|
|||
|
|||
RE: ccc bench wake up
try to use the 2 messages ( 0x130 & 0x12F ) at same time , as i know one message is to wakeup the module and the other one is to keep it live ( not to go to sleep mode )
|
|||
06-02-2019, 06:12 AM,
Post: #7
|
|||
|
|||
RE: ccc bench wake up
Hi,
Do I need connect cid and con to work with CCC on bench? I connect power and CAN Bus, I close MOST ring. The only module that I can connect is gateway, rest show IFH-9 error. I thing CCC is reseting because I hear from time to time CD drive. But maybe I need to connect CID and Controler to work? If I helped, please magic buttons thx+rep
|
|||
06-02-2019, 12:49 PM,
Post: #8
|
|||
|
|||
RE: ccc bench wake up
Hello i have normal bench without can emu and ccc wiring i too only can connect to gw, cant connect to another most modules where could be problem?
|
|||
06-02-2019, 13:40 PM,
Post: #9
|
|||
|
|||
RE: ccc bench wake up
How you connect power to ccc?
I connect only: 12V - pin 15 Ground - pin 12. What aboute pin 14 from LM? It's only for illuminating? If I helped, please magic buttons thx+rep
|
|||
06-02-2019, 14:42 PM,
Post: #10
|
|||
|
|||
RE: ccc bench wake up
Yes its ilumination, everythibg conected +- can and most, my icom adapter blinks that with most everythibg good
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Tool for bench read 8hp | Garryq | 9 | 1,564 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
Bosch MEVD172H bench backup | mrproper | 1 | 249 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
ENAV2 bench activation | Airbus | 10 | 797 |
25-02-2024, 08:17 AM Last Post: jb2005 |
|
Motronic 3.3.1 bench | jaramillo | 3 | 173 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
|
Dde Coding/flash with esys in bench? | ruben_17non | 0 | 183 |
08-02-2024, 21:28 PM Last Post: ruben_17non |
|
Entrynav2 - Trying to Trigger Component Protection on Bench | 2002JCW | 5 | 464 |
30-01-2024, 16:44 PM Last Post: DEJMIEN |
|
NBT display on bench without unit | djordan | 4 | 324 |
15-01-2024, 08:08 AM Last Post: Powerlab |
|
cas / cluster bench setup | Cniksor | 103 | 23,824 |
09-01-2024, 09:43 AM Last Post: MIKUr1 |
|
Entrynav2 bench | Jalami | 1 | 296 |
06-01-2024, 15:28 PM Last Post: Airbus |
|
ID8 bench CID can not light | bbw | 3 | 465 |
12-12-2023, 20:36 PM Last Post: Airbus |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content