Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ccc bench wake up
06-02-2019, 18:13 PM,
Post: #11
|
|||
|
|||
RE: ccc bench wake up
just buy cantiecar
|
|||
06-02-2019, 23:19 PM,
Post: #12
|
|||
|
|||
RE: ccc bench wake up
I have fully working bench why i could not use it your advice not great..
|
|||
07-02-2019, 08:16 AM,
(This post was last modified: 07-02-2019, 08:33 AM by lustek.)
Post: #13
|
|||
|
|||
RE: ccc bench wake up
Silva is your navi constantly reboot every ~50 seconds? Mine does.
If I additionally connect KOMBI I can hear gong as when starting up (when navi reset). I have communication with CID but see only black screen. Are you connect FAN and it work? With plug Are you using for it? I connect it to X13814 Is my navi death or I miss something? If I helped, please magic buttons thx+rep
|
|||
07-02-2019, 09:00 AM,
(This post was last modified: 07-02-2019, 09:02 AM by Silva1337.)
Post: #14
|
|||
|
|||
RE: ccc bench wake up
Yes it reboots, but unit should be faulty because its donor, i see screen normaly with bmw logo, fan is working during test i didnt connected kombi
|
|||
07-02-2019, 09:39 AM,
Post: #15
|
|||
|
|||
RE: ccc bench wake up
Hmm,
I have LCI navi but pre-LCI CID with cable. I have litle bit problem puting this cable to CCC unit but I did that. Maybe thats way my screen is black. I haven't change vins in any modules - cas, kgm, cid and ccc have differents vin but I don't think that's a problem.. If I helped, please magic buttons thx+rep
|
|||
07-02-2019, 09:51 AM,
Post: #16
|
|||
|
|||
RE: ccc bench wake up
in photo ccc is lci , screen pre lci it has nothing to do
better say why i can only program gw without other most parts |
|||
07-02-2019, 11:33 AM,
Post: #17
|
|||
|
|||
RE: ccc bench wake up
Hey bro, I have problem like you + no image working hard to get it ride.
Now I see that f@cking guy sell me screen from E90.What I know, CCC need one different flash for that If I helped, please magic buttons thx+rep
|
|||
07-02-2019, 17:45 PM,
Post: #18
|
|||
|
|||
RE: ccc bench wake up
What version of KGM are you using?
If I helped, please magic buttons thx+rep
|
|||
22-02-2019, 08:51 AM,
Post: #19
|
|||
|
|||
RE: ccc bench wake up
Hi,
I try too wake up ccc throuw arduino and can bus shield but no luck. msg1: {0x8C,0x50,0x8A,0xDD,0xF4,0x05,0x30,0x06} ID: 0x12F CAN.sendMsgBuf(ID,0,8,msg1) delay(100) and......nothing happen What I'm doing wrong? I set boundrate to 115200 If I helped, please magic buttons thx+rep
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Tool for bench read 8hp | Garryq | 9 | 1,572 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
Bosch MEVD172H bench backup | mrproper | 1 | 249 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
ENAV2 bench activation | Airbus | 10 | 801 |
25-02-2024, 08:17 AM Last Post: jb2005 |
|
Motronic 3.3.1 bench | jaramillo | 3 | 174 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
|
Dde Coding/flash with esys in bench? | ruben_17non | 0 | 183 |
08-02-2024, 21:28 PM Last Post: ruben_17non |
|
Entrynav2 - Trying to Trigger Component Protection on Bench | 2002JCW | 5 | 465 |
30-01-2024, 16:44 PM Last Post: DEJMIEN |
|
NBT display on bench without unit | djordan | 4 | 324 |
15-01-2024, 08:08 AM Last Post: Powerlab |
|
cas / cluster bench setup | Cniksor | 103 | 23,844 |
09-01-2024, 09:43 AM Last Post: MIKUr1 |
|
Entrynav2 bench | Jalami | 1 | 298 |
06-01-2024, 15:28 PM Last Post: Airbus |
|
ID8 bench CID can not light | bbw | 3 | 467 |
12-12-2023, 20:36 PM Last Post: Airbus |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content